Compatible With:

Wire Clip



Knob



Handle Bar Assembly



Battery Compartment Assembly



Right Side Plate



Left Side Plate



Replacement Screw



Screw



Nut M12



Scraper (341111205)



80V Power Control Board Kit



Link Block



Axle For Impellor



Middle Handle



U-Bolt M8



Upper Chute Control Rod



Discharge Chute



Small Gear



Big Plastic Gear



Right Driving Block



Wheel Ring

Specs:

Manuals

• 2601302AZ 80V 20\" Brushless Snow Thrower Manual

Includes:

Does temperature affect my battery performance?

Lithium-Ion batteries are very resilient to cold temperatures. However, we always recommend charging and storing the battery in a safe, dry, room temperature environment. Long term cold whether use/storage can allow the internal temperature of the battery to drop away. If the internal temperature of the battery drops below -17°C voltage output maybe reduced, and battery communication may be affected. However, if a cold battery is brought back into a safe, dry, room temperature environment and allowed to warm up (should take no more than 10-20 minutes) then there should be no long-term negative impact to battery performance or lifespan. Please note that we recommend placing the battery on the charger after it has returned to room temperature to ensure maximum charge when in use.

Can I use my snow on gravel?

We do not recommend using our Greenworks Snow Throwers or Snow Shovels on gravel surfaces. Gravel, stones, or any loose surface material will be picked up and thrown by the snow thrower, causing damage to the unit and potentially nearby property and people. Exceptions apply for the 60V dual stage Snow Thrower.

What is the impeller made of?

Most Greenworks impellers are plastic; the material is polyethylene plastic. With the exception on Greenworks 80V 22” –22” has metal/rubber assembly, dual stage has full metal.

What is the recommended ambient temperature range?

Snow throwers can be stored at any temperature if the environment is sheltered (indoors) and dry. Batteries and chargers should be stored between 1.4F (-17C) ~ 113F (45C).

How big a driveway can this cover in a single battery charge?

Our snow thrower kits are usually packaged with enough battery capacity to cover the average 4 car driveway. Please note that actual performance can vary according to snow depth and snow condition.

Is the Snow Thrower difficult to assemble?

This depends on the model however most Greenworks Snow Throwers require minimal assembly. This is all clearly detailed inside the owner's manual. You will need to attach the handle and chute. If you should have any questions or concerns, we would be happy to provide assistance.

My chute is clogged with snow, what should I do?

On rare occasions, heavy or icy snow may cause the discharge chute to become clogged. A clogged snow thrower is caused by ice or sticky snow building up around the discharge chute and not allowing snow to flow through as it normally would. If you do get a clog while snow blowing, DO NOT attempt to unclog it with your hands or feet. Instead, turn your machine off and wait at least 10 seconds for it to fully stop. Then, use a broom handle or other long, stiff object to clear the blockage. Lastly, make sure the adjustment chute is not all the way down; this will clog the machine and cause the unit to stop.

What are the benefits of a circular cord head?

The head of the power cable is designed to be circular; this is to ensure the power cable from the unit can securely hold an extension cord and to reduce any chance of moisture or snow from getting into the two parts. The head of the power cord is flexible, any universal single head outdoor extension cord will fit, simply squeeze the sides, and insert the extension cord.

How far can the snow thrower discharge snow?

The distances at which snow is thrown is dependent on the type of snow. For example, light/fluffy snow will have a greater throwing distance in comparison to wet/heavy snowfalls.

Are the Skid Plates wearable? What are they made of?

Greenworks skid plates are wearable; wearable parts carry a 90-day warranty against wear and tear. Most of our units have a metal skid plates except for our 22" snow thrower models which have a nylon design.

Can you lubricate the snow chute to throw snow further?

Lubricant can be used to reduce clogging which can prevent the snow thrower from throwing at capacity. However, please keep in mind the heavier the snow the less it will be thrown. To reduce the issues with snow clogging which can affect performance you can use an ice repellent or Teflon spray.