24V Battery Charger, CAF806
Description
Description
Ditch the hassles of gas in favor of an eco-friendly, hassle-free and powerful alternative. Greenworks' 24V battery platform powers a family of 125+ tools for both indoor and outdoor use.
- Diagnostic LED charging indicator. Communicates current charge level, and any battery or charger issues
- Charges 24V 1.5Ah (BAG711) battery in 45 minutes
- Charges 24V 2Ah (BAG708) battery in 60 minutes
- Charges 24V 4Ah (BAG709) battery in 120 minutes
- Charges 24V 5Ah (BAG710) battery in 150 minutes
- Can be used on bench top or mounted on the wall
Category: Batteries & Chargers
Voltage: 24V
Warranty: 3 Years
Included: One (1) 24V Battery Charger
Specifications
Specifications
-
Voltage24V
-
Weight1.3 lbs.
-
Size4.5" × 6.5" × 2.8"
-
Warranty3-Year Warranty
-
Charges 24V 1.5Ah Battery45 Minutes
-
Charges 24V 2Ah Battery60 Minutes
-
Charges 24V 4Ah Battery120 Minutes
-
Charges 24V 5Ah Battery150 Minutes
Manuals
Manuals
-
Download:
Frequently Asked Questions
Frequently Asked Questions
- The charger indicates that my battery is fully charged but I was just using it and it depleted. Why isn’t it charging?
- My charger is flashing red when I engage my battery. Why is this happening?
- My charger has a solid red light on it when I engage my battery. What is happening?
- Are your chargers made for 220V or 120V outlets?
Putting a battery that was just in use onto the charger often results in a false full charge signal. Remove the battery from the charger and allow it to rest in a room temperature area for approximately 10-15 minutes before charging.
When the battery is inserted into the charger and the status LED blinks red, remove the battery from the charger for 1 minute, then reinsert. If the status LED blinks green, then the battery is properly charging. If the status LED is still blinking red, remove the battery and unplug the charger for 1 minute. After 1 minute, plug in the charger and reinsert the battery. If the status LED blinks green, then the battery is properly charging. If the status LED is still blinking red, then this likely indicates an issue with the battery or charger and should be taken care of either with our warranty team or by means of replacement.
This typically indicates that the battery is at the wrong temperature to be charged. Allow the battery and charger to rest indoors at room temperature until they are no longer hot/cold and attempt charging again.
Greenworks chargers sold in the USA and Canada are designed for use on 120V outlets only.
