Make a stunning, rustic wood Christmas tree with just 1x3 boards and these Greenworks tools: the 24V 7.25" Brushless Circular Saw, 24V 18-Gauge Brad Nailer, and 24V Finishing Sander. Let’s get started!
Materials
- 1x3 boards (enough for the tree's branches and optional base)
- Wood glue
- Brad nails (sized for the thickness of your boards)
- Sandpaper (medium and fine grit)
- Wood stain, paint, or clear coat (optional)
- Measuring tape
- Pencil
Step 1: Sketch and Plan
- Decide your tree size (e.g., 1-3 ft tall).
-
Create a layout for the branches:
- Horizontal pieces (the "branches") will gradually shorten as they go up.
- Optionally, add a sturdy base for stability.
- Mark your measurements on the 1x3 boards with a pencil.
Step 2: Cut Your Boards
-
Use the Greenworks 24V 7.25" Brushless Circular Saw
to cut the following pieces:
-
Cut List (point to point):
- 1x 14 inches, with one 22.5° end and one 45° end
- 1x 12 inches, with one 22.5° end and one 45° end
- 4x 12 inches, with 22.5° ends
- 1x 21 inches, with 22.5° ends
- 1x 12 inches, with 22.5° ends
-
Cut List (point to point):
- Use the saw's adjustable bevel for angled cuts if you prefer a unique design.
Step 3: Smooth the Wood
-
Sand all edges and surfaces of the cut pieces with the Greenworks 24V Finishing Sander:
- Start with medium-grit sandpaper to remove rough spots.
- Switch to fine-grit sandpaper for a smooth, finished surface.
- Wipe off dust with a clean cloth.
Step 4: Assemble the Tree
- Lay out the branches on a flat surface to check alignment and create a triangular tree shape.
- Start attaching the longest branch at the bottom, spacing each branch evenly as you move upward.
- Apply wood glue at each joint for added strength.
- Secure the branches together with the Greenworks 24V 18-Gauge Brad Nailer, ensuring the nails go cleanly through overlapping sections.
- If adding a base, attach the crisscross base pieces to the bottom branches for stability.
Step 5: Add Finishing Touches
- Apply stain, paint, or clear coat for your desired finish. Allow it to dry fully.
- Lightly sand between coats with fine-grit sandpaper for a polished look.
- Decorate your tree with ornaments, lights, or ribbon for a festive touch.
Optional Customizations
- Add small hooks or clips to the branches to hold ornaments or string lights.
- Experiment with different branch shapes or patterns for a modern or rustic look.
Why Use Greenworks Tools?
- 24V 7.25" Brushless Circular Saw: Cuts cleanly and precisely through wood with ease.
- 24V 18-Gauge Brad Nailer: Makes assembly quick and professional-looking.
- 24V Finishing Sander: Ensures a smooth, splinter-free surface perfect for staining or painting.