80V 22" Brushless Snow Thrower (Tool Only)

Lithium-Ion batteries are resilient to cold temperatures. However, we always recommend charging and storing the battery in a safe, dry, room-temperature environment. Long-term cold weather use/storage can allow the internal temperature of the battery to drop away. If the internal temperature of the battery drops below -17°C voltage output may be reduced, and battery communication may be affected. However, if a cold battery is brought back into a safe, dry, room temperature environment and allowed to warm up (should take no more than 10-20 minutes) then there should be no long-term negative impact on battery performance or lifespan. Please note that we recommend placing the battery on the charger after it has returned to room temperature to ensure maximum charge when in use.

We do not recommend using our single-stage snow throwers or our snow shovels on gravel surfaces. Gravel, stones, or any loose surface material will be picked up and thrown by the snow thrower, causing damage to the unit and potentially nearby property and people.

Snow throwers can be stored at any temperature if the environment is sheltered (indoors) and dry. Batteries and chargers should always be stored indoors at room temperature.

Our single-stage snow thrower kits are often supplied with enough battery capacity to cover the average 4-car driveway. It is important to note that the overall run time received is ultimately determined by the load acting against the unit and will fluctuate.

Our units have been designed for quick and easy assembly! The majority of single-stage units can be assembled in approximately 15 minutes. All instructions are clearly detailed within the owner's manual supplied with your purchase. If you should have any questions or concerns, we would be happy to provide assistance.

Heavy or icy snow may cause the discharge chute to become clogged while in use. If you do get a clog, DO NOT attempt to unclog it with your hands or feet. Instead, turn your machine off and wait at least 10 seconds for it to fully stop. Then, use a chute-clearing brush or a similar object to clear the clog (not included). Operating Tip: If you notice that the chute is clogging often, try adjusting the angle of the chute and impeller speed (if applicable).

The distance that snow is thrown varies depending on the type of snow, wind, and angle of the chute deflector. Light snow will have a greater throwing distance in comparison to wet/heavy snowfalls.

Yes. Greenworks skid shoes are wearable; wearable parts carry a 90-day warranty against wear and tear.

Only Greenworks batteries, chargers, and machines of the same voltage are compatible and interchangeable with one another. Please be advised that the higher the ampere-hour (Ah) rating is on a battery, the more run time it can provide.

Yes, this unit can be operated on slopes and or hills. Always exercise extreme caution when operating on slopes and ensure you have proper footing and balance at all times.

No, the wheels on our single-stage snow thrower models are not designed for use with tire chains.

The benefit of having an adjustable impeller speed ensures that the unit can be used in a variety of areas and conditions. A lower auger speed usually translates to a smaller throwing distance - low speed also gives the user more control so that you can direct the snow where you want and avoid overshooting or re-covering previously cleared areas. When operating the unit at a higher speed, you can throw the snow further when the space allows and clear the area more quickly. Operating Tip: If you notice that the chute is clogging often, try speeding up the auger.

Most Greenworks impellers are made of plastic. The exception is the Greenworks 80V 22”, which uses a metal/rubber impeller assembly. The dual-stage models use fully metal impellers.

It does take time to get used to having a cord attach to your snow shovel, we suggest keeping the electric cord as close to the outlet as you can and then move away from the outlet, so the slack always stay on the side you are moving away from or put the cord over your shoulder. That way it is always behind you while using the snow shovel but over time it will get easier to manage.

The benefit of a circular cord head; the head of the power cable is designed to be circular; this is to ensure the power cable from the unit can securely hold an extension cord and to reduce any chance of moisture or snow from getting into the two parts. The head of the power cord is flexible, any universal single head outdoor extension cord will fit, simply squeeze the sides, and insert the extension cord.

Greenworks skid plates are a wearable; wearable parts carry a 90-day warranty against wear and tear. Most of our units have a metal skid plates except for our 22" snow thrower models which have a nylon design.

Lubricant can be used to reduce clogging which can prevent the snow thrower from throwing at capacity. However, please keep in mind the heavier the snow the less it will be thrown. To reduce the issues with snow clogging which can affect performance you can use an ice repellent or Teflon spray.