60V 20" Snow Thrower, 4.0Ah Battery and Charger
60V 20" Snow Thrower, 4.0Ah Battery and Charger is backordered and will ship as soon as it is back in stock.
Key Features
Key Features
- ✓Brushless Motor - Highly efficient brushless motor provides increased torque, quiet operation and longer life.
- ✓Quiet Operation - Allows you to work during early mornings or late evenings without disturbing your neighbours.
- ✓LED headlights illuminate your path in poor light conditions.
- ✓Push Button Start - For easier start up.
- ✓Clears up to a 2-4 car driveway on a single charge
- ✓180 degree directional chute
Warranty
Warranty
Compatible With :
Description
Description
Greenworks 60V Snow Thrower is ideal for smaller properties and clears snow easily without the hassle of gas or a cord. Powered by an 60V 4Ah lithium-ion battery that is compatible across the entire 60V Greenworks program. For homeowners who want the benefits of going cordless for everyday yard work.
Specifications
Specifications
-
Voltage60V
-
Weight32 lbs.
-
Size21.5" × 41.5" × 35.5"
-
Clearing Path20 in
-
Wheel Size7 in
-
Clearing Depth10 in
-
Discharge Distance20 ft.
-
Light Count2
-
Handle Positions1
-
Package Dimensions21.8" x 22.2" x 21"
-
Package Weight39 lbs (17.6kg)
-
Battery Ampere-Hours1 x 4.0Ah
-
Charge Time for (1) 4.0Ah BatteryUp to 150 minutes
-
Battery IndicatorPower Display on Battery
-
MotorBrushless
-
Rated Power of Motor1.1kW
-
Horsepower (HP)1.5HP
-
Chute Control180° Adjustable Discharge Chute
-
Chute DeflectorAdjust Up/Down for Throwing Distance
-
Clearing Area (4" Snow / 10" Snow)Up to 2421.87 ft² / 484.37 ft²
-
Variable Speed ImpellerNo
-
Impeller MaterialPolyethylene
-
Length of Impeller16"
-
No Load Speed1800 RPM
-
Noise Level at 0' (User)73 dB
-
Foldable for StorageNo
-
Adjustable Skid ShoesNo
-
Skid Shoe MaterialMetal
-
Zero Turn SystemNo
-
Drift CuttersNo
-
Self-PropelledNo
-
Estimated Assembly Time≈10 minutes
-
Warranty4-Year Warranty
-
Specifications for 60V 4.0Ah Lithium-ion Battery
-
Voltage60V
-
Amp Hours4Ah
-
Weight4.4 lbs.
-
Size3.5" × 5.7" × 7.7"
-
Watt Hours240
-
Charge Time to 100%from 120 mins
-
Diagnostic LED IndicatorYes
-
Warranty4-Year Warranty
-
Specifications for 60V Flat Charger - CAC801
-
Voltage60V
-
Weight1.98 lbs.
-
Size6.1" × 3.6" × 8.1"
-
Diagnostic LED indicatorYes
-
Charge Time (2.0 AH Battery)40 min
-
Charge Time (2.5 AH Battery)50 min
-
Charge Time (4.0 AH Battery)80 min
-
Charge Time (5.0 AH Battery)100 min
-
Warranty4-Year Warranty
Frequently Asked Questions
Frequently Asked Questions
- Does temperature affect my battery performance?
- Can this unit be used on gravel?
- What is the recommended ambient temperature range?
- How large of a driveway can be cleared with this product?
- How difficult are Greenworks single-stage snow throwers to assemble?
- My chute is clogged with snow, what should I do?
- How far can the snow thrower discharge snow?
- Are skid shoes wearable parts?
- What battery is compatible with this tool?
- Can it be used on slopes or hills?
- Can I put chains on the tires to prevent slipping?
- What are the benefits of having an adjustable impeller speed?
- Can I leave my battery in the charger after charging it?
- Why do batteries cost so much more than the tool?
- How do I store the battery? Can I leave the battery in the garage or shed?
- My battery is stuck in my tool. How do I get it out?
- How do I check the charge on my battery?
- Can I use any Greenworks battery in any Greenworks tool?
- Are there certain tools that can’t accept all same voltage batteries?
- Do all batteries of the same voltage use the same charger?
- Does battery temperature matter?
- The charger indicates that my battery is fully charged but I was just using it and it depleted. Why isn’t it charging?
- My charger is flashing red when I engage my battery. Why is this happening?
- My charger has a solid red light on it when I engage my battery. What is happening?
- Are your chargers made for 220V or 120V outlets?
Lithium-Ion batteries are resilient to cold temperatures. However, we always recommend charging and storing the battery in a safe, dry, room-temperature environment. Long-term cold weather use/storage can allow the internal temperature of the battery to drop away. If the internal temperature of the battery drops below -17°C voltage output may be reduced, and battery communication may be affected. However, if a cold battery is brought back into a safe, dry, room temperature environment and allowed to warm up (should take no more than 10-20 minutes) then there should be no long-term negative impact on battery performance or lifespan. Please note that we recommend placing the battery on the charger after it has returned to room temperature to ensure maximum charge when in use.
We do not recommend using our single-stage snow throwers or our snow shovels on gravel surfaces. Gravel, stones, or any loose surface material will be picked up and thrown by the snow thrower, causing damage to the unit and potentially nearby property and people.
Snow throwers can be stored at any temperature if the environment is sheltered (indoors) and dry. Batteries and chargers should always be stored indoors at room temperature.
Our single-stage snow thrower kits are often supplied with enough battery capacity to cover the average 4-car driveway. It is important to note that the overall run time received is ultimately determined by the load acting against the unit and will fluctuate.
Our units have been designed for quick and easy assembly! The majority of single-stage units can be assembled in approximately 15 minutes. All instructions are clearly detailed within the owner's manual supplied with your purchase. If you should have any questions or concerns, we would be happy to provide assistance.
Heavy or icy snow may cause the discharge chute to become clogged while in use. If you do get a clog, DO NOT attempt to unclog it with your hands or feet. Instead, turn your machine off and wait at least 10 seconds for it to fully stop. Then, use a chute-clearing brush or a similar object to clear the clog (not included). Operating Tip: If you notice that the chute is clogging often, try adjusting the angle of the chute and impeller speed (if applicable).
The distance that snow is thrown varies depending on the type of snow, wind, and angle of the chute deflector. Light snow will have a greater throwing distance in comparison to wet/heavy snowfalls.
Yes. Greenworks skid shoes are wearable; wearable parts carry a 90-day warranty against wear and tear.
Only Greenworks batteries, chargers, and machines of the same voltage are compatible and interchangeable with one another. Please be advised that the higher the ampere-hour (Ah) rating is on a battery, the more run time it can provide.
Yes, this unit can be operated on slopes and or hills. Always exercise extreme caution when operating on slopes and ensure you have proper footing and balance at all times.
No, the wheels on our single-stage snow thrower models are not designed for use with tire chains.
The benefit of having an adjustable impeller speed ensures that the unit can be used in a variety of areas and conditions. A lower auger speed usually translates to a smaller throwing distance - low speed also gives the user more control so that you can direct the snow where you want and avoid overshooting or re-covering previously cleared areas. When operating the unit at a higher speed, you can throw the snow further when the space allows and clear the area more quickly. Operating Tip: If you notice that the chute is clogging often, try speeding up the auger.
The battery chargers do have auto cut offs to prevent it from over charging. However, we do advise customers to remove the battery from the charger after it has been fully charged and to also unplug the charger from the outlet, as this is good electrical safety practice to do so. This will also help to prevent false defect readings and allows the charger to reset itself each time it’s used to charge a battery.
The battery is the most important component for a battery-operated unit. Please be assured we price our batteries with the cost of material, manufacturing, and current market pricing in mind. Batteries are the costliest items to manufacture and ship in any kit. Full kits including a tool, battery, and charger are priced affordably so that consumers can begin building that line of tools and move forward purchasing tool-only units. When you purchase batteries on their own, it is more notable the cost that they carry.
When the battery is not in use, we suggest storing it indoors, in a cool dry area - away from direct sunlight. Leave the charger unplugged and the battery disconnected from the charger unless it needs charging. It is recommended to store the battery with a full charge, and if it is being stored for a period where no use is expected, to check on the charge every couple of months. If you notice the charge has dropped, we advise charging the battery back up to full before returning it to its safe storage place. Following these steps will ensure you receive the most out of the battery life.
60V/ 80V Products: To remove the battery, push and hold the battery release button. Then, pull the battery pack straight out. In some cases, if the springs underneath have gotten locked down you might have to give a small push to the top of the battery to re-engage them to help the battery pop up. The battery pack fits snugly into the product to prevent accidental dislodging while in use; it may require a strong pull to remove. Before use, be sure that the rails on the battery and product are free of debris that could cause the battery to get stuck. 24V/ 40V Products: To remove the battery, press the latch button on the battery pack down and hold. Pull the battery pack out of the handle. The battery pack fits snugly into the product to prevent accidental dislodging while in use; it may require a strong pull to remove. Before use, be sure that the rails on the battery and product are free of debris that could cause the battery to get stuck.
Press the battery capacity indicator (BCI) button located at the end of the battery. The lights will illuminate according to the battery capacity level. Please note this switch does require a firm direct push using the tip of your finger. If the button is not being fully engaged, the lights will not activate. Please also be advised the lights only stay on for a few seconds and will automatically turn off. Another reason the lights will not power on is if the battery is completely depleted of power and needs to be charged.
Our batteries are interchangeable with tools that are of the same voltage platform only. The difference between batteries of the same voltage is the ampere-hour (Ah) rating. The higher the ampere-hour (Ah) rating on the battery is the more run time it has to offer.
There are a few exceptions. • Our 80V 20” snow thrower models 2600402 / 2605202 / 2601302 manufactured prior to September of 2017 can only use 2.0Ah or 2.5Ah battery models. • Our 60V 8.0Ah battery model 2957102 cannot be used in the following tools due to the height: dual-port lawnmowers, pressure washers, or the wet/dry vacuum.
Yes, they do. Each product line has designated charger models that can charge all batteries in that voltage platform, no matter the Ah rating.
The temperature of the battery prior to use should not be too warm or too cold. For snow throwers if the battery is too cold it may not be operatable. Allow the battery to get to room temperature prior to use. For our other tools allow the battery to cool down prior to use if it’s too warm. To avoid battery temperature issues, batteries should be stored indoors in a dry and cool location. Information on battery storage and temperature will in inside your owner’s manual.
Putting a battery that was just in use onto the charger often results in a false full charge signal. Remove the battery from the charger and allow it to rest in a room temperature area for approximately 10-15 minutes before charging.
When the battery is inserted into the charger and the status LED blinks red, remove the battery from the charger for 1 minute, then reinsert. If the status LED blinks green, then the battery is properly charging. If the status LED is still blinking red, remove the battery and unplug the charger for 1 minute. After 1 minute, plug in the charger and reinsert the battery. If the status LED blinks green, then the battery is properly charging. If the status LED is still blinking red, then this likely indicates an issue with the battery or charger and should be taken care of either with our warranty team or by means of replacement.
This typically indicates that the battery is at the wrong temperature to be charged. Allow the battery and charger to rest indoors at room temperature until they are no longer hot/cold and attempt charging again.
Greenworks chargers sold in the USA and Canada are designed for use on 120V outlets only.