{"warranty":{"warranty":4,"url":"https:\/\/greenworks.antradar.com\/jsapi\/warranties\/warranty-4.png"}}

Features:

Benefits

• Dual Line
• Bump & Feed
• Variable Speed Trigger - Provides on-demand power.
• Front Mounted Motor - Design with aluminum straight shaft provides balance and ergonomics while trimming.

{"scalars":[{"name":"Voltage","value":80,"disp":"80V"},{"name":"Amp Hours","value":2,"disp":"2Ah"},{"name":"Weight","value":16,"disp":"16 lbs."},{"name":"Size","value":"24.5 \u0026times; 89 \u0026times; 16.5","disp":"24.5 \u0026times; 89 \u0026times; 16.5 cm\u003csup\u003e3\u003c\/sup\u003e"},{"name":"Cutting Swath","value":16,"disp":"16 in"},{"name":"Line Diameter","value":"0.080","disp":"0.080 in"},{"name":"Charge Time to 100%","value":30,"disp":"from 30 mins"},{"name":"Runtime","value":45,"disp":"up to 45 mins"},{"name":"Motor","value":"Brushless Motor","disp":"Brushless Motor"},{"name":"No Load Speed","value":"6200(±10%) RPM","disp":"6200(±10%) RPM"},{"name":"Line Feed","value":"Bump Feed","disp":"Bump Feed"},{"name":"Attachment Capable","value":"No","disp":"No"},{"name":"Weight (with Battery)","value":"10.30 lbs (4.67 kg)","disp":"10.30 lbs (4.67 kg)"},{"name":"Warranty","value":"4-Year Warranty","disp":"4-Year Warranty"}]}

• 80V Brushless String Trimmer
• 2901302CA - 80V 2.0 AH Lithium-ion Battery - GBA80200
• 2901402 - 80V Single Port Rapid Charger - GCH8040
• Auxiliary Handle
• Spool
• Owner's Manual

{"productcombos"=>Metafields::JsonStringDrop}

• 80V 16" Brushless String Trimmer & 80V Blower Combo Kit, 2.0 AH Battery and Charger Included (Costco Exclusive)

{"57"=>{"faqid"=>57, "faqtitle"=>"Can I leave my battery in the charger after charging it?", "faqdesc"=>"The battery chargers do have auto cut offs to prevent it from over charging. However, we do advise customers to remove the battery from the charger after it has been fully charged and to also unplug the charger from the outlet, as this is good electrical safety practice to do so. This will also help to prevent false defect readings and allows the charger to reset itself each time it’s used to charge a battery."}, "58"=>{"faqid"=>58, "faqtitle"=>"Why do batteries cost so much more than the tool?", "faqdesc"=>"The battery is the most important component for a battery-operated unit. Please be assured we price our batteries with the cost of material, manufacturing, and current market pricing in mind. \nBatteries are the costliest items to manufacture and ship in any kit. Full kits including a tool, battery, and charger are priced affordably so that consumers can begin building that line of tools and move forward purchasing tool-only units. When you purchase batteries on their own, it is more notable the cost that they carry."}, "59"=>{"faqid"=>59, "faqtitle"=>"How do I store the battery? Can I leave the battery in the garage or shed?", "faqdesc"=>"When the battery is not in use, we suggest storing it indoors, in a cool dry area - away from direct sunlight. Leave the charger unplugged and the battery disconnected from the charger unless it needs charging. It is recommended to store the battery with a full charge, and if it is being stored for a period where no use is expected, to check on the charge every couple of months. If you notice the charge has dropped, we advise charging the battery back up to full before returning it to its safe storage place. Following these steps will ensure you receive the most out of the battery life."}, "60"=>{"faqid"=>60, "faqtitle"=>"My battery is stuck in my tool. How do I get it out?", "faqdesc"=>"60V/ 80V Products: To remove the battery, push and hold the battery release button. Then, pull the battery pack straight out. In some cases, if the springs underneath have gotten locked down you might have to give a small push to the top of the battery to re-engage them to help the battery pop up. The battery pack fits snugly into the product to prevent accidental dislodging while in use; it may require a strong pull to remove. Before use, be sure that the rails on the battery and product are free of debris that could cause the battery to get stuck.\n\n24V/ 40V Products: To remove the battery, press the latch button on the battery pack down and hold. Pull the battery pack out of the handle. The battery pack fits snugly into the product to prevent accidental dislodging while in use; it may require a strong pull to remove. Before use, be sure that the rails on the battery and product are free of debris that could cause the battery to get stuck."}, "61"=>{"faqid"=>61, "faqtitle"=>"How do I check the charge on my battery?", "faqdesc"=>"Press the battery capacity indicator (BCI) button located at the end of the battery. The lights will illuminate according to the battery capacity level. Please note this switch does require a firm direct push using the tip of your finger. If the button is not being fully engaged, the lights will not activate. Please also be advised the lights only stay on for a few seconds and will automatically turn off. Another reason the lights will not power on is if the battery is completely depleted of power and needs to be charged."}, "62"=>{"faqid"=>62, "faqtitle"=>"Can I use any Greenworks battery in any Greenworks tool?", "faqdesc"=>"Our batteries are interchangeable with tools that are of the same voltage platform only. The difference between batteries of the same voltage is the ampere-hour (Ah) rating. The higher the ampere-hour (Ah) rating on the battery is the more run time it has to offer."}, "63"=>{"faqid"=>63, "faqtitle"=>"Are there certain tools that can’t accept all same voltage batteries?", "faqdesc"=>"There are a few exceptions. \n• Our 80V 20” snow thrower models 2600402 / 2605202 / 2601302 manufactured prior to September of 2017 can only use 2.0Ah or 2.5Ah battery models. \n• Our 60V 8.0Ah battery model 2957102 cannot be used in the following tools: any 60V 12\" Snow Shovel, any 60V 22\" Snow Blower, any 60V Tiller/Cultivator & any 60V Lawn Mower."}, "64"=>{"faqid"=>64, "faqtitle"=>"Do all batteries of the same voltage use the same charger?", "faqdesc"=>"Yes, they do. Each product line has designated charger models that can charge all batteries in that voltage platform, no matter the Ah rating."}, "134"=>{"faqid"=>134, "faqtitle"=>"Does battery temperature matter?", "faqdesc"=>"The temperature of the battery prior to use should not be too warm or too cold. For snow throwers if the battery is too cold it may not be operatable. Allow the battery to get to room temperature prior to use. For our other tools allow the battery to cool down prior to use if it’s too warm. To avoid battery temperature issues, batteries should be stored indoors in a dry and cool location. Information on battery storage and temperature will in inside your owner’s manual."}, "65"=>{"faqid"=>65, "faqtitle"=>"The charger indicates that my battery is fully charged but I was just using it and it depleted. Why isn’t it charging?", "faqdesc"=>"Putting a battery that was just in use onto the charger often results in a false full charge signal. Remove the battery from the charger and allow it to rest in a room temperature area for approximately 10-15 minutes before charging."}, "66"=>{"faqid"=>66, "faqtitle"=>"My charger is flashing red when I engage my battery. Why is this happening?", "faqdesc"=>"When the battery is inserted into the charger and the status LED blinks red, remove the battery from\nthe charger for 1 minute, then reinsert. If the status LED blinks green, then the battery is properly\ncharging. If the status LED is still blinking red, remove the battery and unplug the charger for 1 minute. After 1 minute, plug in the charger and reinsert the battery. If the status LED blinks green, then the battery is properly charging. If the status LED is still blinking red, then this likely indicates an issue with the battery or charger and should be taken care of either with our warranty team or by means of replacement."}, "67"=>{"faqid"=>67, "faqtitle"=>"My charger has a solid red light on it when I engage my battery. What is happening?", "faqdesc"=>"This typically indicates that the battery is at the wrong temperature to be charged. Allow the battery and charger to rest indoors at room temperature until they are no longer hot/cold and attempt charging again."}, "68"=>{"faqid"=>68, "faqtitle"=>"Are your chargers made for 220V or 120V outlets?", "faqdesc"=>"Greenworks chargers sold in the USA and Canada are designed for use on 120V outlets only."}, "112"=>{"faqid"=>112, "faqtitle"=>"What is the difference between auto-feed and bump and feed string trimmers?", "faqdesc"=>"Auto-feed string trimmers use centrifugal force to release trimmer line. Each time the unit is activated, the spinning of the trimmer head exerts a force that unlocks the trimmer spool, allowing line to be released. A spring-loaded mechanism relocks the line after approximately 0.25” of line has been release. Therefore, every trigger pull will release line. \n\nBump feed/ bump and feed string trimmers work with a similar mechanism, but the spool lock is manual disengaged by the user by “bumping” the trimmer head on the ground while the unit is in use. This mechanism provides operators with more control over how much line is used."}, "115"=>{"faqid"=>115, "faqtitle"=>"What attachments are compatible with my string trimmer?", "faqdesc"=>"For attachment capable string trimmers, the following brands are compatible:\n\nPoulan Pro, Ryobi-Expand-it and Trimmer plus.\n\nIf you are unsure if you have an attachment capable string trimmer unit, please contact us at info@greenworkstools.com."}, "118"=>{"faqid"=>118, "faqtitle"=>"Why does my trimmer line keep breaking during use?", "faqdesc"=>"Trimmer line will break off during use which is a normal occurrence. In harsher terrain or when used to edge, the string trimmer's line will break off more often as it makes contact with hard surfaces. To reduce line breakage here are some tips:\n\n• Keep the underside of the trimmer head/guard area clean of debris.\n• Ensure that the cutting blade is clean/clear, and the blade is exposed and shard enough to trim the line. This will also help to reduce excessive line breakage.\n• Avoid direct contact with hard surface areas when using the string trimmer.\n• In thicker, denser, and longer grass, you may want to go slower. Listen to the sound of the string trimmer, if it reduces speeds, or slows down too much, back away from the grass and start again at a slower pace."}, "119"=>{"faqid"=>119, "faqtitle"=>"Can I remove the guard from my string trimmer?", "faqdesc"=>"No, string trimmers should never be operated without a guard. The guard is a safety feature and helps reduce debris such as grass clippings from being picked up and flung towards the user. It also has a cutting bar on it to prevent line from overextending and breaking off at large lengths. Operating without a guard will cause the string trimmer to work harder than it must and will reduce the life span of the motor. It will also void the warranty."}, "120"=>{"faqid"=>120, "faqtitle"=>"Why does my line keep unraveling?", "faqdesc"=>"Line unraveling can be caused by winding the spool line the wrong way or simply not winding it tight enough. Please make sure you follow the guide inside your owner’s manual thoroughly as this process may take some time to correctly achieve."}, "124"=>{"faqid"=>124, "faqtitle"=>"What does reduced gear mean for my string trimmer?", "faqdesc"=>"A string trimmer that has a reduced gear motor does not directly drive the trimmer head. Instead, the motor drives a larger gear that is attached to the trimmer head. This reduces the speed of rotation but increases the torque. It allows a smaller, lighter motor to produce extra torque and perform tasks more efficiently, while ensuring that the unit is easy to maneuver."}, "127"=>{"faqid"=>127, "faqtitle"=>"Does my unit come with trimmer line?", "faqdesc"=>"Yes, all Greenworks string trimmers come with spool and line that has already been installed in your unit."}, "129"=>{"faqid"=>129, "faqtitle"=>"Can I use a thicker diameter line than what is recommended?", "faqdesc"=>"No, we do not advise using a thicker diameter line than what is advised in your owner’s manual. The use of a thicker line may result in over working the motor and could potentially damage the motor resulting in shorter life span of the unit. This will also void your warranty."}, "130"=>{"faqid"=>130, "faqtitle"=>"Can I buy replacement line locally?", "faqdesc"=>"Yes, you can use any generic brand of trimmer line to rewind your existing spool. Please refer to your owner’s manual to ensure you purchase the correct diameter of line for your unit."}, "131"=>{"faqid"=>131, "faqtitle"=>"Can I change the original trimmer head?", "faqdesc"=>"No, we do not offer this feature currently. However, we do offer attachment capable string trimmer units that can be used with a variety of different attachments from the following brands: Poulan Pro, Ryobi Expand-It and Trimmer Plus."}}