24V Lithium Ion Charger
Description
Description
This charger works with the original 24V line and not with the current Greenworks 24V line of tools.
- Compatible string trimmers ERP: 21222 & 21222A
- Compatible hedge trimmers ERP: 22132 & 22132A
- Compatible pole hedge trimmers ERP: 22152 & 22152A
- Compatible blowers ERP: 24122 & 24122A
- Compatible chain saws ERP: 20092 & 20092A
- Compatible pole saws ERP: 20102 & 20102A
- Used with 2AH battery 31101978 and 4AH battery 29322
Category: Batteries & Chargers
Voltage: 24V
Charger Warranty: 3 year
Included: One (1) 24V charger
Frequently Asked Questions
Frequently Asked Questions
- The charger indicates that my battery is fully charged but I was just using it and it depleted. Why isn’t it charging?
- My charger is flashing red when I engage my battery. Why is this happening?
- My charger has a solid red light on it when I engage my battery. What is happening?
- Are your chargers made for 220V or 120V outlets?
Putting a battery that was just in use onto the charger often results in a false full charge signal. Remove the battery from the charger and allow it to rest in a room temperature area for approximately 10-15 minutes before charging.
When the battery is inserted into the charger and the status LED blinks red, remove the battery from the charger for 1 minute, then reinsert. If the status LED blinks green, then the battery is properly charging. If the status LED is still blinking red, remove the battery and unplug the charger for 1 minute. After 1 minute, plug in the charger and reinsert the battery. If the status LED blinks green, then the battery is properly charging. If the status LED is still blinking red, then this likely indicates an issue with the battery or charger and should be taken care of either with our warranty team or by means of replacement.
This typically indicates that the battery is at the wrong temperature to be charged. Allow the battery and charger to rest indoors at room temperature until they are no longer hot/cold and attempt charging again.
Greenworks chargers sold in the USA and Canada are designed for use on 120V outlets only.
