2000402CA

80V 18" Brushless Chainsaw (Tool Only)

Regular price: $269.00
Sale price: $269.00
Regular price
Unit price: per

Load image into Gallery viewer, 80V 18" Brushless Chainsaw (Tool Only)

2000402CA

80V 18" Brushless Chainsaw (Tool Only)

(0)

Regular price: $269.00
Sale price: $269.00
Regular price
Unit price: per

Landscaping has never been easier with Greenworks Pro 80V System. The most powerful cordless battery platform in outdoor power equipment, you can now breeze through homes, corporate parks and entertainment venues with zero gas, zero emission and zero maintenance. Go from zero to power with a push of a button and get you through the task at hand with less vibration, less noise and less mess. With additional batteries, a rapid charger for quick charge time and a multiple tool compatibility platform, you can get all your landscaping done with all the power and performance of gas while at a lower cost of operation.

Key Features:

Automatic Oiler - Ensures durability and extends the life of the chain.
Steel Bucking Spikes
Brushless Motor - Highly efficient brushless motor provides increased torque, quiet operation and longer life.
Tool Only - Battery and charger not included
Quiet Operation - Allows you to work during early mornings or late evenings without disturbing your neighbours.
Lightweight - For comfort, control, and less fatigue – 20% lighter than comparable gas-powered models.
Electronic Chain Brake - Added protection.
Translucent Oil Tank - Clear view of oil level.
Chain Speed
Bar Length

Compatible With:

18" Chain Bar

Drive Sprocket Kit

Adjusting Block

18" Replacement Chain for Select Chainsaws

C-Clip

Sprocket Kit

Sprocket

Sprocket Kit

Wrench

Oil Cap

Front Hand Guard Assembly

Front Handle Assembly

Side Cover Assembly

18" Chainsaw Bar

Scabbard

Oil Cap

Specifications:

Voltage	80V
Weight	11 lbs.
Assembled Product Dimensions	34.2" × 10.3" × 10.2"
Package Dimensions	34.4" × 10.4" × 10.4"
Package Weight	22.2 lbs. (10.1 kg)
Batteries	Not Included / Sold Separately
Motor	Brushless
Rated Power of Motor	1.8 kW
Active Chain Brake?	Yes
Bar/Chain Length	18"
Chain Size	3/8" Pitch, .050" Gauge, 62 Drive Links
Tenison System?	Tooled
Bar Nut Size	M8 Standard Thread
Blade Speed	10.5 Meters per second
Chain Oiler	Automatic
Oil Type	Standard Bar and Chain Oil
Oil Tank Capacity	200 ml
Estimated Assembly Time	≈5 minutes
Warranty	4-Year Warranty
Battery Compatibility	*Please note: for optimal weight distribution we only recommend the use of either our Greenworks 80V 2.0 AH or 2.5 AH batteries. This process also reduces the chance of kickback when the saw is in use.

Manuals

2000402CA Brushless Chainsaw Manual / Manuel de Tronçonneuse sans Brosses

Includes:

80V DigiPro Chainsaw
18" Bar and Chain
Scabbard
Owner's Manual

{"106"=>{"faqid"=>106, "faqtitle"=>"What oil do I use with my chainsaw?", "faqdesc"=>"Our units use a standard bar and chain oil. You can purchase this from your local hardware store; no specific brand name is required", "faqtitle_fr"=>"Quelle huile dois-je utiliser avec ma scie à chaîne ?", "faqdesc_fr"=>"Nos appareils utilisent une huile standard pour barre et chaîne. Vous pouvez l'acheter dans votre quincaillerie locale, aucune marque spécifique n'est requise", "faqtitle_es"=>"", "faqdesc_es"=>"", "faqtitle_zh"=>"", "faqdesc_zh"=>""}, "107"=>{"faqid"=>107, "faqtitle"=>"Why is my chainsaw leaking oil?", "faqdesc"=>"All chainsaws will slowly “leak” oil in storage (mostly from it seeping off the chain). To prevent excessive leakage, store with as little oil left in the reservoir as possible, lay the chainsaw flat with a rag beneath it and the pole saw upright with the motor head at the top. \n\nDuring first use, operators should only fill the reservoir to roughly half full and check periodically to see if it needs to be refilled. Eventually, you will become accustomed to the amount of oil required for each job. This procedure will make it easier to store the unit as oil free as possible and reduce oil run off.", "faqtitle_fr"=>"Pourquoi ma scie à chaîne perd-elle de l'huile ?", "faqdesc_fr"=>"Toutes les scies à chaîne perdent lentement de l'huile lorsqu'elles sont entreposées (principalement parce qu'elle s'écoule de la chaîne). Pour éviter les fuites excessives, entreposez la scie à chaîne avec le moins d'huile possible dans le réservoir, en la plaçant à plat avec un chiffon en dessous, et en plaçant la scie à perche à la verticale, la tête du moteur vers le haut. Lors de la première utilisation, l'opérateur ne doit remplir le réservoir qu'à moitié et vérifier périodiquement s'il est nécessaire de le remplir à nouveau. Vous finirez par vous habituer à la quantité d'huile nécessaire pour chaque travail. Cette procédure facilitera l'entreposage de l'appareil et réduira l'écoulement de l'huile.", "faqtitle_es"=>"", "faqdesc_es"=>"", "faqtitle_zh"=>"", "faqdesc_zh"=>""}, "109"=>{"faqid"=>109, "faqtitle"=>"How large of a branch/log can I cut?", "faqdesc"=>"If you are looking to cut logs with one pass, the log needs to be about 2\" smaller than the bar. However, there are many techniques to use a chainsaw for larger cuts.", "faqtitle_fr"=>"Quelle est la taille de la branche ou de la bûche que je peux couper ?", "faqdesc_fr"=>"Si vous souhaitez couper des bûches en un seul passage, la bûche doit être environ 2\" plus petite que le guide. Cependant, il existe de nombreuses techniques pour utiliser une scie à chaîne pour des coupes plus importantes.", "faqtitle_es"=>"", "faqdesc_es"=>"", "faqtitle_zh"=>"", "faqdesc_zh"=>""}, "110"=>{"faqid"=>110, "faqtitle"=>"What is the run time?", "faqdesc"=>"The run time of a chainsaw is measured in cuts per charge. The number of cuts per charge or “run time” that you receive would depend on the load acting on the saw (i.e., the thickness and type of wood being cut) as the chainsaw would use more battery power on tougher and thick objects being cut.", "faqtitle_fr"=>"Quelle est la durée de fonctionnement ?", "faqdesc_fr"=>"L'autonomie d'une scie à chaîne est mesurée en nombre de coupes par charge. Le nombre de coupes par charge ou « durée d'utilisation » dépend de la charge exercée sur la scie (c'est-à-dire de l'épaisseur et du type de bois à couper), car la scie à chaîne utilise davantage la puissance de la batterie sur les objets plus durs et plus épais à couper.", "faqtitle_es"=>"", "faqdesc_es"=>"", "faqtitle_zh"=>"", "faqdesc_zh"=>""}, "111"=>{"faqid"=>111, "faqtitle"=>"How do I know if my chain is tensioned enough?", "faqdesc"=>"Chains should be tensioned before use. Check intermittently throughout each chore to make sure the chain is kept properly tensioned. A correctly tensioned chain should only pull away from the bar enough to fit a dime between the teeth and the bar.\n***DO NOT TENSION A CHAIN AFTER YOU HAVE FINSHED USING THE TOOL. HOT METAL EXPANDS. IF THE CHAIN NEEDS TENSIONED WHEN HOT, THEN ALLOW TO COOL, THE CONTRACTING METAL COULD POTENTIALLY DAMAGE THE CHAIN, THE BAR AND EVEN THE UNIT. WAIT UNTIL THE NEXT USE (OR AT LEAST UNTIL COOLED) BEFORE TENSIONING***", "faqtitle_fr"=>"Comment savoir si ma chaîne est suffisamment tendue ?", "faqdesc_fr"=>"Les chaînes doivent être tendues avant d'être utilisées. Vérifiez régulièrement au cours de chaque travail pour vous assurer que la chaîne est correctement tendue. Une chaîne correctement tendue ne doit s'écarter du guide que suffisamment pour qu'une pièce de 10 cents puisse passer entre les dents et le guide. ***NE TENDEZ PAS UNE CHAÎNE APRÈS AVOIR FINI D'UTILISER L'OUTIL. LE MÉTAL CHAUD SE DILATE. SI LA CHAÎNE DOIT ÊTRE TENDUE ALORS QU'ELLE EST CHAUDE, PUIS LAISSÉE À REFROIDIR, LE MÉTAL QUI SE CONTRACTE PEUT POTENTIELLEMENT ENDOMMAGER LA CHAÎNE, LE GUIDE ET MÊME L'APPAREIL. ATTENDEZ LA PROCHAINE UTILISATION (OU AU MOINS LE REFROIDISSEMENT) AVANT DE TENDRE LA CHAÎNE***", "faqtitle_es"=>"", "faqdesc_es"=>"", "faqtitle_zh"=>"", "faqdesc_zh"=>""}, "113"=>{"faqid"=>113, "faqtitle"=>"Can I use another brand of chain?", "faqdesc"=>"Yes, however, it must match the specifications of the original chain (gauge, pitch, and drive links). These specifications my be found inside of your owner’s manual.", "faqtitle_fr"=>"Puis-je utiliser une autre marque de chaîne ?", "faqdesc_fr"=>"Oui, mais elle doit correspondre aux spécifications de la chaîne d'origine (calibre, pas et maillons d'entraînement). Ces spécifications se trouvent à l'intérieur de votre manuel du propriétaire.", "faqtitle_es"=>"", "faqdesc_es"=>"", "faqtitle_zh"=>"", "faqdesc_zh"=>""}, "114"=>{"faqid"=>114, "faqtitle"=>"What file size do I use to sharpen the chain?", "faqdesc"=>"Our chains may be sharpened using a 5/32” round file.", "faqtitle_fr"=>"Quelle taille de lime dois-je utiliser pour affûter la chaîne ?", "faqdesc_fr"=>"Nos chaînes peuvent être affûtées à l'aide d'une lime ronde de 5/32\".", "faqtitle_es"=>"", "faqdesc_es"=>"", "faqtitle_zh"=>"", "faqdesc_zh"=>""}, "116"=>{"faqid"=>116, "faqtitle"=>"Why isn’t my chain cutting?", "faqdesc"=>"If the wood is burning/smoking, this indicates that the chain is on backwards. Another reason could be that the chain is dull and needs to be sharpened or replaced. \nReplace the chain if:\n• The length of the cutting edges is less than 5 mm.\n• There is too much space between the drive links and the rivets.\n• The cut speed is slow\n• Sharpening the chain many times but it does not increase the cutting speed.", "faqtitle_fr"=>"Pourquoi ma chaîne ne coupe-t-elle pas ?", "faqdesc_fr"=>"Si le bois brûle ou fume, cela signifie que la chaîne est à l'envers. Une autre raison peut être que la chaîne est émoussée et qu'elle doit être affûtée ou remplacée. Remplacez la chaîne si : \n• La longueur des lames est inférieure à 5 mm. \n• Il y a trop d'espace entre les maillons d'entraînement et les rivets.\n• La vitesse de coupe est lente \n• L'affûtage répété de la chaîne ne permet pas d'augmenter la vitesse de coupe.", "faqtitle_es"=>"", "faqdesc_es"=>"", "faqtitle_zh"=>"", "faqdesc_zh"=>""}, "117"=>{"faqid"=>117, "faqtitle"=>"Why does my chain keep falling off?", "faqdesc"=>"Chainsaw chains can come off due to multiple reasons such as worn-down bars, worn-down sprockets, and wrongly set chain tension. Please check the chain tension and condition of all parts prior to using. If anything is worn or damaged, replace parts before using again. \nReplace the bar if:\n• the groove is not fit with the height of the drive links (which must never touch the bottom).\n• the inside of the guide bar is worn and make the chain lean to one side.", "faqtitle_fr"=>"Pourquoi ma chaîne ne cesse-t-elle de tomber ?", "faqdesc_fr"=>"Les chaînes de scie à chaîne peuvent se détacher pour de multiples raisons, telles que l'usure du guide, l'usure des pignons et un mauvais réglage de la tension de la chaîne. Veuillez vérifier la tension de la chaîne et l'état de toutes les pièces avant d'utiliser la scie. Si une pièce est usée ou endommagée, remplacez-la avant de l'utiliser à nouveau. Remplacez le guide si la rainure n'est pas adaptée à la hauteur des maillons d'entraînement (qui ne doivent jamais toucher le fond) ou si l'intérieur du guide-chaîne est usé et fait pencher la chaîne d'un côté.", "faqtitle_es"=>"", "faqdesc_es"=>"", "faqtitle_zh"=>"", "faqdesc_zh"=>""}}

Show FAQs

What oil do I use with my chainsaw?

Our units use a standard bar and chain oil. You can purchase this from your local hardware store; no specific brand name is required

Why is my chainsaw leaking oil?

All chainsaws will slowly “leak” oil in storage (mostly from it seeping off the chain). To prevent excessive leakage, store with as little oil left in the reservoir as possible, lay the chainsaw flat with a rag beneath it and the pole saw upright with the motor head at the top. During first use, operators should only fill the reservoir to roughly half full and check periodically to see if it needs to be refilled. Eventually, you will become accustomed to the amount of oil required for each job. This procedure will make it easier to store the unit as oil free as possible and reduce oil run off.

How large of a branch/log can I cut?

If you are looking to cut logs with one pass, the log needs to be about 2" smaller than the bar. However, there are many techniques to use a chainsaw for larger cuts.

What is the run time?

The run time of a chainsaw is measured in cuts per charge. The number of cuts per charge or “run time” that you receive would depend on the load acting on the saw (i.e., the thickness and type of wood being cut) as the chainsaw would use more battery power on tougher and thick objects being cut.

How do I know if my chain is tensioned enough?

Chains should be tensioned before use. Check intermittently throughout each chore to make sure the chain is kept properly tensioned. A correctly tensioned chain should only pull away from the bar enough to fit a dime between the teeth and the bar. ***DO NOT TENSION A CHAIN AFTER YOU HAVE FINSHED USING THE TOOL. HOT METAL EXPANDS. IF THE CHAIN NEEDS TENSIONED WHEN HOT, THEN ALLOW TO COOL, THE CONTRACTING METAL COULD POTENTIALLY DAMAGE THE CHAIN, THE BAR AND EVEN THE UNIT. WAIT UNTIL THE NEXT USE (OR AT LEAST UNTIL COOLED) BEFORE TENSIONING***

Can I use another brand of chain?

Yes, however, it must match the specifications of the original chain (gauge, pitch, and drive links). These specifications my be found inside of your owner’s manual.

What file size do I use to sharpen the chain?

Our chains may be sharpened using a 5/32” round file.

Why isn’t my chain cutting?

If the wood is burning/smoking, this indicates that the chain is on backwards. Another reason could be that the chain is dull and needs to be sharpened or replaced. Replace the chain if: • The length of the cutting edges is less than 5 mm. • There is too much space between the drive links and the rivets. • The cut speed is slow • Sharpening the chain many times but it does not increase the cutting speed.

Why does my chain keep falling off?

Chainsaw chains can come off due to multiple reasons such as worn-down bars, worn-down sprockets, and wrongly set chain tension. Please check the chain tension and condition of all parts prior to using. If anything is worn or damaged, replace parts before using again. Replace the bar if: • the groove is not fit with the height of the drive links (which must never touch the bottom). • the inside of the guide bar is worn and make the chain lean to one side.