Scie à chaîne sans balais 80 V, 16 pouces (outil uniquement) - CS80L01
Scie à chaîne sans balais 80 V, 16 pouces (outil uniquement) - CS80L01 est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Principales caractéristiques
Principales caractéristiques
- ✓Electronic Chain Brake - Added protection.
- ✓Steel Bucking Spikes
- ✓Automatic Oiler - Ensures durability and extends the life of the chain.
- ✓Moteur sans balais : Moteur sans balais très efficace offre un couple accru, un fonctionnement silencieux et une durée de vie plus longue.
- ✓Chain Speed
- ✓Bar Length
- ✓Quiet Operation - Allows you to work during early mornings or late evenings without disturbing your neighbours.
- ✓Translucent Oil Tank - Clear view of oil level.
- ✓Lightweight - For comfort, control, and less fatigue – 20% lighter than comparable gas-powered models.
Garantie
Garantie
Compatible With :
Scie à chaîne sans balais 80 V, 16 pouces (outil uniquement) - CS80L01
Description
Description
Lorsqu’il s’agit d’équipement électrique extérieur, vous mettez l’accent sur la « puissance ». Et pourquoi pas? Pour les propriétaires comme vous qui entreprennent des travaux petits ou grands, vous avez besoin d’une construction robuste et d’une performance optimale à long terme. La famille d'outils Greenworks Pro 80 V relève le défi avec un système de batterie universel qui fonctionne sur plusieurs produits, des moteurs à haut rendement et une technologie intelligente innovante. Tous les outils Greenworks Pro 80 V bénéficient d'une garantie limitée de 4 ans sur les outils et la batterie.
Spécifications
Spécifications
-
Tension80 V
-
Poids9,5 livres.
-
Dimensions du produit assemblé30,4" × 9,1" × 9,0"
-
Dimensions de l'emballage19,4" × 10,0" × 11,0"
-
Poids du colis16,5 lb. (7,5 kg)
-
Pilesnon incluses/vendues séparément
-
Moteursans balais
-
Puissance nominale du moteur1,8 kW
-
Frein de chaîne actif ?Oui
-
Longueur de la barre/chaîne16"
-
Taille de la chaînepas de 3/8", calibre .050", 56 maillons d'entraînement
-
Système de tenison ?Outilé
-
Taille de l'écrou de barrefiletage standard M8
-
Vitesse de la lame10,5 mètres par seconde
-
Graisseur de chaîneautomatique
-
Type d'huilehuile standard pour guide-chaîne et chaîne
-
Capacité du réservoir d'huile180 ml
-
Temps d'assemblage estimé≈5 minutes
-
Garantie4 ans de garantie
-
Compatibilité des batteriespour une répartition optimale du poids, nous recommandons uniquement l'utilisation de nos batteries Greenworks 80 V 2,0 AH ou 2,5 AH. Ce processus réduit également le risque de rebond lorsque la scie est utilisée.
Manuels
Manuels
Vidéos de produits
Foire aux questions
Foire aux questions
- What oil do I use with my chainsaw?
- Why is my chainsaw leaking oil?
- How large of a branch/log can I cut?
- What is the run time?
- How do I know if my chain is tensioned enough?
- Can I use another brand of chain?
- What file size do I use to sharpen the chain?
- Why isn’t my chain cutting?
- Why does my chain keep falling off?
Our units use a standard bar and chain oil. You can purchase this from your local hardware store; no specific brand name is required
All chainsaws will slowly “leak” oil in storage (mostly from it seeping off the chain). To prevent excessive leakage, store with as little oil left in the reservoir as possible, lay the chainsaw flat with a rag beneath it and the pole saw upright with the motor head at the top. During first use, operators should only fill the reservoir to roughly half full and check periodically to see if it needs to be refilled. Eventually, you will become accustomed to the amount of oil required for each job. This procedure will make it easier to store the unit as oil free as possible and reduce oil run off.
If you are looking to cut logs with one pass, the log needs to be about 2" smaller than the bar. However, there are many techniques to use a chainsaw for larger cuts.
The run time of a chainsaw is measured in cuts per charge. The number of cuts per charge or “run time” that you receive would depend on the load acting on the saw (i.e., the thickness and type of wood being cut) as the chainsaw would use more battery power on tougher and thick objects being cut.
Chains should be tensioned before use. Check intermittently throughout each chore to make sure the chain is kept properly tensioned. A correctly tensioned chain should only pull away from the bar enough to fit a dime between the teeth and the bar. ***DO NOT TENSION A CHAIN AFTER YOU HAVE FINSHED USING THE TOOL. HOT METAL EXPANDS. IF THE CHAIN NEEDS TENSIONED WHEN HOT, THEN ALLOW TO COOL, THE CONTRACTING METAL COULD POTENTIALLY DAMAGE THE CHAIN, THE BAR AND EVEN THE UNIT. WAIT UNTIL THE NEXT USE (OR AT LEAST UNTIL COOLED) BEFORE TENSIONING***
Yes, however, it must match the specifications of the original chain (gauge, pitch, and drive links). These specifications my be found inside of your owner’s manual.
Our chains may be sharpened using a 5/32” round file.
If the wood is burning/smoking, this indicates that the chain is on backwards. Another reason could be that the chain is dull and needs to be sharpened or replaced. Replace the chain if: • The length of the cutting edges is less than 5 mm. • There is too much space between the drive links and the rivets. • The cut speed is slow • Sharpening the chain many times but it does not increase the cutting speed.
Chainsaw chains can come off due to multiple reasons such as worn-down bars, worn-down sprockets, and wrongly set chain tension. Please check the chain tension and condition of all parts prior to using. If anything is worn or damaged, replace parts before using again. Replace the bar if: • the groove is not fit with the height of the drive links (which must never touch the bottom). • the inside of the guide bar is worn and make the chain lean to one side.
