Enregistrez votre produit aujourd'hui !

Livraison gratuite sur toutes les commandes de plus de 50 $*

Expédition retardée ? En savoir plus

Aspirateur robotique SEULEMENT 99 $ avec le code 99VAC

SKU : 2016302CA

Scie à chaîne sans balais 40 V, 16 pouces, batterie 4,0 Ah et chargeur inclus

$389.00

Principales caractéristiques

  • Pointes de trépan en acier
  • Tension de chaîne sans outil - Pour des réglages rapides afin que vous puissiez revenir à la tâche en cours.
  • Graisseur automatique - Assure la durabilité et prolonge la durée de vie de la chaîne.
  • Léger – Pour plus de confort, de contrôle et moins de fatigue – 20 % plus léger que les modèles à essence comparables.
  • Rebond réduit – Pour une coupe plus sûre.
  • Démarrage par bouton-poussoir - Pour un démarrage plus facile.
  • Réservoir d'huile translucide - Vue claire du niveau d'huile.
  • Moteur sans balais - Moteur sans balais très efficace offre un couple accru, un fonctionnement silencieux et une durée de vie plus longue.
  • Frein de chaîne électronique - Protection supplémentaire
  • Vitesse de la chaîne
  • Longueur du guide-chaîne
  • Opération silencieuse - Vous permet de travailler tôt le matin ou tard le soir sans déranger vos voisins.

Garantie

warranty-image

Compatible With :

Description

Les outils électriques d'extérieur sans fil sont idéaux pour les propriétaires comme vous qui simplifient et se concentrent sur ce qui est essentiel pour tirer le meilleur parti de la vie. La famille d'outils Greenworks 40 V est construite avec une construction de poids moyen et des moteurs à haut rendement. La plate-forme lithium-ion Greenworks 40 V alimente plus de 40 produits d'extérieur, notamment des tondeuses, des souffleurs, des coupe-herbes, des scies à chaîne, des taille-haies et bien plus encore ! La batterie lithium-ion 40 V fournit la puissance dont vous avez besoin et offre une puissance sans décoloration et sans perte de mémoire après la charge. La plateforme Greenworks 40 V est livrée avec une garantie outil/batterie de 3 ans pour protéger votre investissement. De fabrication de haute qualité, ces produits sont faciles à démarrer et plus légers que les produits à gaz auxquels vous êtes habitué, ce qui rend votre journée de travail dans le jardin beaucoup plus facile. Parfaits pour les terrains allant jusqu'à ⅓ d'acre, les outils Greenworks 40 V sont légers, démarrent instantanément et ne nécessitent pratiquement aucun entretien – pas d'essence, pas d'huile, pas de gâchis – mais fournissent toujours une puissance semblable à celle du gaz.

Spécifications

  • Voltage
    40 V
  • Poids
    15 livres
  • Dimensions du produit assemblé
    31 po. x 9,5 po. x 8,7 po.
  • Ampères-heures de la batterie 
    4,0 Ah
  • Indicateur de batterie 
     Affichage de charge sur la batterie
  • Coupes par charge (bois 4x4)
    Jusqu'à 150 coupes
  • Chargeur inclus 
     Chargeur standard 2A
  • Temps de charge pour une batterie de 4,0 Ah
    Jusqu'à 120 minutes
  • Moteur
    Sans balais
  • Puissance nominale du moteur 
     1,3 kW
  • Frein de chaîne actif ? 
     Oui
  • Longueur du guide-chaîne/chaîne 
     16 po.
  • Taille de la chaîne
    Pas de 3/8 po., Calibre .043 po., 56 maillons d'entraînement
  • Taille du fil d'affûtage de chaîne 
    5/32 po.
  • Système de tension ? 
    Sans outil
  • Vitesse de la lame 
     11 mètres par seconde
  • Graisseur de chaîne 
     Automatique
  • Type d'huile 
    Huile standard pour guide-chaîne et chaîne
  • Capacité du réservoir d'huile
    200 ml
  • Temps d'assemblage estimé 
    ≈ 5 minutes
  • Garantie 
     3 ans de garantie
  • Batterie lithium-ion 40 V 4,0 Ah 
  • Voltage
    40 V
  • Ampères-heures
    4,0 Ah
  • Poids 
    3,02 livres
  • Taille
    3,7 po. × 4 po. × 7,1 po.
  • Wattheures 
     144
  • Temps de charge à 100 % 
     À partir de 120 minutes
  • Cycles de vie 
    Jusqu'à 2000
  • Garantie 
     3 ans de garantie
  • Chargeur 40 V 
  • Voltage
    40 V
  • Poids
    2 livres
  • Taille
    6,5 po. × 8,3 po. × 3,7 po.
  • Temps de charge à 100 % 
     À partir de 120 minutes
  • Temps de charge (batterie 2,0 AH)
    À partir de 60 minutes
  • Temps de charge (batterie 4,0 AH)
    À partir de 120 minutes
  • Garantie 
     3 ans de garantie

Manuels

Vidéos de produits

Foire aux questions

  • What oil do I use with my chainsaw?
  • Our units use a standard bar and chain oil. You can purchase this from your local hardware store; no specific brand name is required

  • Why is my chainsaw leaking oil?
  • All chainsaws will slowly “leak” oil in storage (mostly from it seeping off the chain). To prevent excessive leakage, store with as little oil left in the reservoir as possible, lay the chainsaw flat with a rag beneath it and the pole saw upright with the motor head at the top. During first use, operators should only fill the reservoir to roughly half full and check periodically to see if it needs to be refilled. Eventually, you will become accustomed to the amount of oil required for each job. This procedure will make it easier to store the unit as oil free as possible and reduce oil run off.

  • How large of a branch/log can I cut?
  • If you are looking to cut logs with one pass, the log needs to be about 2" smaller than the bar. However, there are many techniques to use a chainsaw for larger cuts.

  • What is the run time?
  • The run time of a chainsaw is measured in cuts per charge. The number of cuts per charge or “run time” that you receive would depend on the load acting on the saw (i.e., the thickness and type of wood being cut) as the chainsaw would use more battery power on tougher and thick objects being cut.

  • How do I know if my chain is tensioned enough?
  • Chains should be tensioned before use. Check intermittently throughout each chore to make sure the chain is kept properly tensioned. A correctly tensioned chain should only pull away from the bar enough to fit a dime between the teeth and the bar. ***DO NOT TENSION A CHAIN AFTER YOU HAVE FINSHED USING THE TOOL. HOT METAL EXPANDS. IF THE CHAIN NEEDS TENSIONED WHEN HOT, THEN ALLOW TO COOL, THE CONTRACTING METAL COULD POTENTIALLY DAMAGE THE CHAIN, THE BAR AND EVEN THE UNIT. WAIT UNTIL THE NEXT USE (OR AT LEAST UNTIL COOLED) BEFORE TENSIONING***

  • Can I use another brand of chain?
  • Yes, however, it must match the specifications of the original chain (gauge, pitch, and drive links). These specifications my be found inside of your owner’s manual.

  • What file size do I use to sharpen the chain?
  • Our chains may be sharpened using a 5/32” round file.

  • Why isn’t my chain cutting?
  • If the wood is burning/smoking, this indicates that the chain is on backwards. Another reason could be that the chain is dull and needs to be sharpened or replaced. Replace the chain if: • The length of the cutting edges is less than 5 mm. • There is too much space between the drive links and the rivets. • The cut speed is slow • Sharpening the chain many times but it does not increase the cutting speed.

  • Why does my chain keep falling off?
  • Chainsaw chains can come off due to multiple reasons such as worn-down bars, worn-down sprockets, and wrongly set chain tension. Please check the chain tension and condition of all parts prior to using. If anything is worn or damaged, replace parts before using again. Replace the bar if: • the groove is not fit with the height of the drive links (which must never touch the bottom). • the inside of the guide bar is worn and make the chain lean to one side.

  • Can I leave my battery in the charger after charging it?
  • The battery chargers do have auto cut offs to prevent it from over charging. However, we do advise customers to remove the battery from the charger after it has been fully charged and to also unplug the charger from the outlet, as this is good electrical safety practice to do so. This will also help to prevent false defect readings and allows the charger to reset itself each time it’s used to charge a battery.

  • Why do batteries cost so much more than the tool?
  • The battery is the most important component for a battery-operated unit. Please be assured we price our batteries with the cost of material, manufacturing, and current market pricing in mind. Batteries are the costliest items to manufacture and ship in any kit. Full kits including a tool, battery, and charger are priced affordably so that consumers can begin building that line of tools and move forward purchasing tool-only units. When you purchase batteries on their own, it is more notable the cost that they carry.

  • How do I store the battery? Can I leave the battery in the garage or shed?
  • When the battery is not in use, we suggest storing it indoors, in a cool dry area - away from direct sunlight. Leave the charger unplugged and the battery disconnected from the charger unless it needs charging. It is recommended to store the battery with a full charge, and if it is being stored for a period where no use is expected, to check on the charge every couple of months. If you notice the charge has dropped, we advise charging the battery back up to full before returning it to its safe storage place. Following these steps will ensure you receive the most out of the battery life.

  • My battery is stuck in my tool. How do I get it out?
  • 60V/ 80V Products: To remove the battery, push and hold the battery release button. Then, pull the battery pack straight out. In some cases, if the springs underneath have gotten locked down you might have to give a small push to the top of the battery to re-engage them to help the battery pop up. The battery pack fits snugly into the product to prevent accidental dislodging while in use; it may require a strong pull to remove. Before use, be sure that the rails on the battery and product are free of debris that could cause the battery to get stuck. 24V/ 40V Products: To remove the battery, press the latch button on the battery pack down and hold. Pull the battery pack out of the handle. The battery pack fits snugly into the product to prevent accidental dislodging while in use; it may require a strong pull to remove. Before use, be sure that the rails on the battery and product are free of debris that could cause the battery to get stuck.

  • How do I check the charge on my battery?
  • Press the battery capacity indicator (BCI) button located at the end of the battery. The lights will illuminate according to the battery capacity level. Please note this switch does require a firm direct push using the tip of your finger. If the button is not being fully engaged, the lights will not activate. Please also be advised the lights only stay on for a few seconds and will automatically turn off. Another reason the lights will not power on is if the battery is completely depleted of power and needs to be charged.

  • Can I use any Greenworks battery in any Greenworks tool?
  • Our batteries are interchangeable with tools that are of the same voltage platform only. The difference between batteries of the same voltage is the ampere-hour (Ah) rating. The higher the ampere-hour (Ah) rating on the battery is the more run time it has to offer.

  • Are there certain tools that can’t accept all same voltage batteries?
  • There are a few exceptions. • Our 80V 20” snow thrower models 2600402 / 2605202 / 2601302 manufactured prior to September of 2017 can only use 2.0Ah or 2.5Ah battery models. • Our 60V 8.0Ah battery model 2957102 cannot be used in the following tools due to the height: dual-port lawnmowers, pressure washers, or the wet/dry vacuum.

  • Do all batteries of the same voltage use the same charger?
  • Yes, they do. Each product line has designated charger models that can charge all batteries in that voltage platform, no matter the Ah rating.

  • Does battery temperature matter?
  • The temperature of the battery prior to use should not be too warm or too cold. For snow throwers if the battery is too cold it may not be operatable. Allow the battery to get to room temperature prior to use. For our other tools allow the battery to cool down prior to use if it’s too warm. To avoid battery temperature issues, batteries should be stored indoors in a dry and cool location. Information on battery storage and temperature will in inside your owner’s manual.

  • The charger indicates that my battery is fully charged but I was just using it and it depleted. Why isn’t it charging?
  • Putting a battery that was just in use onto the charger often results in a false full charge signal. Remove the battery from the charger and allow it to rest in a room temperature area for approximately 10-15 minutes before charging.

  • My charger is flashing red when I engage my battery. Why is this happening?
  • When the battery is inserted into the charger and the status LED blinks red, remove the battery from the charger for 1 minute, then reinsert. If the status LED blinks green, then the battery is properly charging. If the status LED is still blinking red, remove the battery and unplug the charger for 1 minute. After 1 minute, plug in the charger and reinsert the battery. If the status LED blinks green, then the battery is properly charging. If the status LED is still blinking red, then this likely indicates an issue with the battery or charger and should be taken care of either with our warranty team or by means of replacement.

  • My charger has a solid red light on it when I engage my battery. What is happening?
  • This typically indicates that the battery is at the wrong temperature to be charged. Allow the battery and charger to rest indoors at room temperature until they are no longer hot/cold and attempt charging again.

  • Are your chargers made for 220V or 120V outlets?
  • Greenworks chargers sold in the USA and Canada are designed for use on 120V outlets only.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
2
252226729
Phenomenal Saw

I have had this saw for approximately two years now. I first bought it for my side by side when we are out riding we quite often come across fallen trees or limbs across the trail that need to be cut. However since then we have moved to a small acreage and had to have over a hundred trees felled and the stumps removed. I used my saw so much cleaning branches and roots for the burn pile that I had to replace the chain because of so many sharpening's. This little saw is still doing a great job around here!

2
250502174
Works at minus 24 degrees Celsius

I have had this 16-inch chain saw for almost five years now. It is an excellent machine. On 13 January 2024 I used my chainsaw to cut deadfall for firewood at minus 24 degrees. No problems at all. I keep the chainsaw in the cab of the truck until I use it not in the box. I keep the spare batteries in the cab until I need them. I had a windstorm knock two large pine trees over my driveway on 15 November 2020 and this chainsaw cleaned them up no problem. I keep it inside the house until I need to use it. The batteries and chargers (I also have lawnmower) are all in my basement.

Scie à chaîne sans balais 40 V, 16 pouces, batterie 4,0 Ah et chargeur inclus

$389.00

Les outils électriques d'extérieur sans fil sont idéaux pour les propriétaires comme vous qui simplifient et se concentrent sur ce qui est essentiel pour tirer le meilleur parti de la vie. La famille d'outils Greenworks 40 V est construite avec une construction de poids moyen et des moteurs à haut rendement. La plate-forme lithium-ion Greenworks 40 V alimente plus de 40 produits d'extérieur, notamment des tondeuses, des souffleurs, des coupe-herbes, des scies à chaîne, des taille-haies et bien plus encore ! La batterie lithium-ion 40 V fournit la puissance dont vous avez besoin et offre une puissance sans décoloration et sans perte de mémoire après la charge. La plateforme Greenworks 40 V est livrée avec une garantie outil/batterie de 3 ans pour protéger votre investissement. De fabrication de haute qualité, ces produits sont faciles à démarrer et plus légers que les produits à gaz auxquels vous êtes habitué, ce qui rend votre journée de travail dans le jardin beaucoup plus facile. Parfaits pour les terrains allant jusqu'à ⅓ d'acre, les outils Greenworks 40 V sont légers, démarrent instantanément et ne nécessitent pratiquement aucun entretien – pas d'essence, pas d'huile, pas de gâchis – mais fournissent toujours une puissance semblable à celle du gaz.

Voir le produit