Tondeuse poussée sans balais 48 V (2 x 24 V), 17 pouces, (2) batteries 4,0 Ah et chargeur à double port
Tondeuse poussée sans balais 48 V (2 x 24 V), 17 pouces, (2) batteries 4,0 Ah et chargeur à double port est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Principales caractéristiques
Principales caractéristiques
- ✓Démarrage par bouton-poussoir - Pour un démarrage plus facile.
- ✓Rangement compact - Les commandes ergonomiques et faciles à utiliser garantissent un confort ultime. De plus, utilisez jusqu'à 70 % moins d'espace dans votre garage avec les poignées rabattables pour un rangement compact.
- ✓Moteur sans balais - Moteur sans balais très efficace offre un couple accru, un fonctionnement silencieux et une durée de vie plus longue.
- ✓Déchiquetage ou ensachage 2-en-1 - Le carter de coupe 2-en-1 vous permet de choisir votre finition de coupe entre le déchiquetage ou l'ensachage.
- ✓Réglage de la hauteur à 6 positions
- ✓Garantie de 3 ans
Garantie
Garantie
Description
Description
Simplifiez le travail de jardin avec un couple deux fois supérieur
Puissamment facile. Facile à démarrer par simple pression sur un bouton. Douce pour les oreilles car elle tond silencieusement. Facile à ranger dans les petits espaces, vous pouvez même la suspendre si vous le souhaitez.
Les fonctionnalités supplémentaires incluent une fonction 2 en 1 offrant des capacités de paillage et d'ensachage arrière
Aucune odeur de gaz. Aucun cordon de tirage. Aucun entretien. Aucune pollution respirée. Aucune perte de temps.
Caractéristiques principales
- Carter léger résistant à la rouille de 17 pouces conçu pour une maniabilité aisée
- Démarrage par bouton-poussoir - Appuyez et tondez, plus besoin de tirer sur le cordon
- Le réglage de la hauteur à 6 positions à un seul bouton offre une plage de hauteur de coupe de 1-3/8 po. à 3-3/8 po.
- Deux batteries POWERALL™ 24 V se combinent pour une puissance exceptionnelle de 48 V, supérieure à celle de l'essence, sans quitter la plate-forme de batterie 24 V
- Manœuvrez facilement le terrain avec des roues arrière de 8" et des roues avant de 7 po.
- Système de batterie à deux ports - Autonomies plus longues avec commutation automatique de la batterie
- Les poignées EZ Fold™ sont simples à utiliser : il suffit de les tirer, de les plier et de les ranger en quelques secondes, occupant jusqu'à 70 % d'espace en moins
- La fonction 2 en 1 offre des capacités de paillage et d'ensachage arrière
- La batterie alimente plus de 125 produits 24 V - Une seule batterie pour tondre, souffler, couper, tailler, cultiver et plus encore !
La liste noire
Aucune odeur de gaz.
Aucune émission.
Aucun entretien.
Faible bruit.
Comprend
Comprend
Foire aux questions
Foire aux questions
- Can I use my Greenworks mower on hills and slopes?
- What maintenance is required for my Greenworks mower?
- When should I cut my grass?
- Do I always need to use my self-propelled feature when operating a self-propelled mower?
- Can my Greenworks mower cut up pinecones, branches, twigs, and other yard debris laying on my lawn?
- Can I use my mower in wet conditions such as rain?
- What does SmartCut™mean?
- Does my Greenworks mower unit require gas or oil?
- Is the battery from my Greenworks mower interchangeable with the other units?
- How do I start my mower unit?
Walk behind mower units should not be operated on slopes greater than 15 degrees. This is not a limitation of the unit, but rather to ensure safe footing for the user. When mowing on a hill remember to mow across rather than up and down.
Greenworks mower units require much less maintenance than a traditional gas unit. However, It will still require routine seasonal maintenance. After each use we advise emptying the bag (if bagging has been used), then check/clean off debris on the side discharge, rear slot, clean the underside of the deck with a cloth and wipe the unit down. If there is harder debris stuck to the underside, you may want to use a rubber deck scraper. Make sure to check the unit for loose nuts and bolts after use and secure if needed. Do not expose this unit to water. Check the blade for any damage/dullness and replace or sharpen as needed. Store the unit in a cool/covered and dry location such as garage or shed.
Here are some mowing tips that may be helpful: • Mow when grass is dry. Mow no more than 1/3 of the length of grass at a time. • Mow in the morning or late afternoon to reduce the heat stress on the newly cut grass. • Alternate mowing patterns each time you mow. As grass develops a grain based on your cutting direction it will lean towards the direction of your mowing path. Changing the pattern allows better vertical growth and helps to keep the cut neater. • Consider mulching. To mulch, remove the bag and insert the mulch plug into the rear of the unit. This will leave the clippings on the lawn allowing the nutrients and nitrogen contained within them to return to the soil and allow the remaining grass to recycle them (always discharge the mulch towards a previously cut area to prevent your mower from bogging down). • Leave grass a little higher in shaded areas. This keeps them healthy in relatively nutrient poor conditions. • Always keep in mind what conditions your variety of grass prefers. If your grass prefers cooler climates, reduce the frequency with which you mow and increase the cutting height of your mower during hot seasons to compensate for the reduced growth rate these varieties may experience in this type of weather.
No, you do not have to engage the self-propelled feature to operate a self-propelled unit. There are two separate motors. Familiarize yourself with the self-propelled feature and the cutting feature of your unit (instruction inside the manual). Once you understand these two features you can engage the blade without using the self-propelled feature.
Greenworks mower are designed for grass, weeds, and foliage. It would not be advisable to depend on the mower to mulch any other types of debris. Before operation please thoroughly inspect the area where the mower is to be used. Remove all stones, sticks, wire, toys, and other objects that could be tripped over or thrown by the blade. Thrown objects can cause serious personal injury.
For safety reasons (which can be found inside your owner's manual under safety information) we advise not using the mower in wet conditions as unstable footing could cause operators to slip, causing a potential hazard. *60V X-RANGE line which features IPX4 weather-resistant construction and can be safely used in damp conditions. Be mindful of your footing during use in potentially slippery conditions. *
The SmartCut™ feature, also considered a Power Save feature, is designed to maximize run time and battery life by automatically detecting the length of grass and adjusting its power or throttle up when needed. With this feature, the rotational speed of the blades will not always stay the same. They will spin faster automatically when you hit thicker grass.
No, gas and oil are not required for the operation our units. Greenworks mowers are either battery operated or corded (extension cord sold separately). This information can be seen on the product page of each tool and inside the owner’s manual.
Greenworks offers a variety of different voltage lines for a wide range of individual residential needs. For example, we offer: 24v, 40v, 60v and 80v. Each voltage line has their own set of interchangeable tools and batteries but are not interchangeable across different voltage lines. To see compatible tools within each voltage line select shop by platform on our site. If you’re still unsure if your unit is compatible, please contact us at info@greenworkstools.com for further assistance. We’re happy to help
For corded units, ensure you have the correct extension cord (reference the owner’s manual) and power from your outlet. If you’re using a battery unit, ensure the battery has a full/adequate charge. Make sure you are starting the unit in the following order, or it will not start: 1. Push down the safety switch button, while pressing the safety switch button with one hand, use your other hand to simultaneously pull the bale switch towards you. 2. Once the machine turns on you can let go of the safety button and continue to hold the bale (lever) handle. 3. The unit will only start when the safety button is pressed first, followed by the bale switch. If it is reversed the unit will not power on. For some of our EZ Fold™ units the start sequence will not affect the unit. Use the correct batteries according to the unit and ensure the batteries have adequate charge, you can either push the button first or pull up the handle. These models are not affected by the start order. However, please always refer to your owner’s manual for verification on the starting process as this would be the most accurate source of information.