Pelle à neige sans fil Greenworks 40 V 12 pouces, batterie 4 Ah et chargeur inclus
Pelle à neige sans fil Greenworks 40 V 12 pouces, batterie 4 Ah et chargeur inclus est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Principales caractéristiques
Principales caractéristiques
- ✓DigiPro™ Brushless Technology - Provides 2x more torque, longer runtimes, quiet operation, and extended motor life.
- ✓Quiet Operation - Allows you to work during early mornings or late evenings without disturbing your neighbours.
- ✓Lightweight - For comfort, control, and less fatigue – 20% lighter than comparable gas-powered models.
- ✓Largeur de dégagement : Chemin de dégagement de 12 pouces.
- ✓Profondeur de dégagement : Profondeur de dégagement de 6 pouces.
- ✓Push Button Start - For easier start up.
- ✓Moteur sans balais : Moteur sans balais très efficace offre un couple accru, un fonctionnement silencieux et une durée de vie plus longue.
- ✓Auxiliary Handle - Adds comfort and control during use.
Garantie
Garantie
Compatible With :
Description
Description
Bienvenue dans une vie. Alimenté. Par Greenworks. Facilitez le déneigement des trottoirs et des allées cet hiver avec la pelle à neige sans balais Greenworks 40 V 12 po. Construite avec un moteur sans balais à haut rendement de 1,1 kW offrant des vitesses de turbine allant jusqu'à 1 800 tr/min, cette pelle à neige impressionnera à coup sûr. Son fonctionnement silencieux la rend pratique pour à utiliser tôt le matin ou tard le soir. Alimenté par une batterie lithium-ion de 40 V, il présente une largeur de déblaiement de 12" et une profondeur de déblaiement de 4". Dites adieu au gaz cet hiver et bonjour à Greenworks. Cette pelle à neige est compatible avec le système complet d'outils et de batteries Greenworks 40V (vendu au Canada). Bénéficiant d'une garantie de 3 ans, cette pelle à neige est conçue pour durer des années.
- SANS BALAIS : Le moteur sans balais de 1,1 kW très efficace offre un couple accru, des durées de fonctionnement plus longues, un fonctionnement silencieux et une durée de vie prolongée du moteur. Dégage rapidement les allées, les trottoirs, les patios et plus encore avec un chemin de dégagement de 12" et une profondeur de dégagement de 4".
- PERFORMANCE : Puissance à la demande fournissant jusqu'à 1 800 tr/min. Avec une telle puissance, vous pouvez projeter de la neige jusqu'à 20 pieds.
- POLYVALENT : Une conception légère, une ergonomie supérieure et une poignée réglable permettent de réduire la fatigue de l'utilisateur et d'offrir un confort ultime lors de fortes chutes de neige. De plus, son fonctionnement silencieux vous permet de travailler au crépuscule ou à l'aube sans déranger vos voisins.
- FAIT LE TRAVAIL : Dégagez jusqu'à une allée de 4 voitures avec une seule charge en utilisant une batterie de 4,0 Ah entièrement chargée. Rechargez rapidement votre batterie en 120 minutes maximum.
- COMPACT : conception compacte pour un rangement pratique lorsqu'il n'est pas utilisé. Parfait pour les zones avec un espace limité !
- FONCTIONNEMENT PAR TEMPS FROID : Pour des performances optimales, utilisez des piles conservées à température ambiante (16°C-23°C). Les unités peuvent rencontrer des difficultés à fonctionner lorsqu'elles sont stockées en dehors de la plage de température recommandée. Si l'appareil ne démarre pas, laissez la batterie revenir à température ambiante et réessayez.
- COMPREND : Pelle à neige 40 V 12 po, batterie lithium-ion 4,0 Ah, chargeur et manuel du propriétaire
Spécifications
Spécifications
-
Tension40 V
-
Taille15" × 41,4" × 11,8"
-
Chemin de dégagement12 po
-
Profondeur de dégagement6 po
-
Distance de décharge20 pieds.
-
Dimensions de l'emballage41,5" × 15,1" × 12"
-
Poids du colis24 lb (10,8 kg)
-
Ampères-heures de la batterie1 x 4,0 Ah
-
Temps de charge pour (1) batterie de 4,0 Ahjusqu'à 120 minutes
-
Indicateur de batterieaffichage de l'alimentation sur la batterie
-
Moteursans balais
-
Puissance nominale du moteur1,1 kW
-
Zone de déneigement (neige de 4 po / neige de 10 po)jusqu'à 871,87 pi² / 333,68 pi²
-
Roue à vitesse variablenon
-
Matériau de la turbinepolyéthylène.
-
Longueur de la turbine11"
-
Vitesse à vide1800 tr/min
-
Niveau de bruit à 0' (utilisateur)75 dB
-
Temps d'assemblage estimé≈10 minutes
-
Garantie3 ans de garantie
-
Batterie lithium-ion 40 V 4,0 Ah
-
Tension40 V
-
Heures d'ampli4Ah
-
Poids3,02 livres.
-
Taille3,7" × 4" × 7,1"
-
Wattheures144
-
Temps de charge à 100 %à partir de 120 minutes
-
Cycles de viejusqu'à 2000
-
Garantie3 ans de garantie
-
Chargeur 40 V
-
Tension40 V
-
Poids2 livres.
-
Taille6,5" × 8,3" × 3,7"
-
Temps de charge à 100 %à partir de 120 minutes
-
Temps de charge (batterie 2,0 AH)à partir de 60 minutes
-
Temps de charge (batterie 4,0 AH)à partir de 120 minutes
-
Garantie3 ans de garantie
Vidéos de produits
Foire aux questions
Foire aux questions
- Is it difficult to use snow shovel/thrower with an extension cord?
- Can I use my Snow Shovel on uneven pavement?
- Does the Snow Shovel have a chute?
- Why won’t my snow shovel start?
- Can I use my Snow Shovel on stairs?
- Can I leave my battery in the charger after charging it?
- Why do batteries cost so much more than the tool?
- How do I store the battery? Can I leave the battery in the garage or shed?
- My battery is stuck in my tool. How do I get it out?
- How do I check the charge on my battery?
- Can I use any Greenworks battery in any Greenworks tool?
- Are there certain tools that can’t accept all same voltage batteries?
- Do all batteries of the same voltage use the same charger?
- Does battery temperature matter?
- The charger indicates that my battery is fully charged but I was just using it and it depleted. Why isn’t it charging?
- My charger is flashing red when I engage my battery. Why is this happening?
- My charger has a solid red light on it when I engage my battery. What is happening?
- Are your chargers made for 220V or 120V outlets?
It does take time to get used to having a cord attach to your snow shovel, we suggest keeping the electric cord as close to the outlet as you can and then move away from the outlet, so the slack always stays on the side you are moving away from or put the cord over your shoulder. That way it is always behind you while using the snow shovel but over time it will get easier to manage.
We do not recommend using this snow shovel on uneven or non-paved areas. It works best on smooth and flat surface areas. As the operator works along the uneven surface, the tool will need to be lifted to avoid contact. Contact to non-paved areas will damage the scraper faster the more the unit makes hard contact.
The Snow Shovel is not equipped with a chute; it is a light duty unit, perfect for light to moderate snow conditions. We suggest directing the snow in front or to either side by pushing the snow shovel forward so that it rides on the scraper. The direction of the snow is changed when the user turns the shovel.
The tool is equipped with a safety start up feature. The units will only start when the following sequence is done: 1.Verify that the battery pack is inserted into the battery compartment. 2.Press and hold the lock-out button 3.While holding the lock-out button, press and hold the trigger switch. Please note, the Snow Shovel will not start if the lock-out button is not held until the trigger switch is lifted. Once trigger is pressed and unit is started, release the lock-out button.
Snow shovels are an effective tool for clearing steps and decks with ease. They are lightweight, gasless, and easy to start, so almost anyone can operate them.
The battery chargers do have auto cut offs to prevent it from over charging. However, we do advise customers to remove the battery from the charger after it has been fully charged and to also unplug the charger from the outlet, as this is good electrical safety practice to do so. This will also help to prevent false defect readings and allows the charger to reset itself each time it’s used to charge a battery.
The battery is the most important component for a battery-operated unit. Please be assured we price our batteries with the cost of material, manufacturing, and current market pricing in mind. Batteries are the costliest items to manufacture and ship in any kit. Full kits including a tool, battery, and charger are priced affordably so that consumers can begin building that line of tools and move forward purchasing tool-only units. When you purchase batteries on their own, it is more notable the cost that they carry.
When the battery is not in use, we suggest storing it indoors, in a cool dry area - away from direct sunlight. Leave the charger unplugged and the battery disconnected from the charger unless it needs charging. It is recommended to store the battery with a full charge, and if it is being stored for a period where no use is expected, to check on the charge every couple of months. If you notice the charge has dropped, we advise charging the battery back up to full before returning it to its safe storage place. Following these steps will ensure you receive the most out of the battery life.
60V/ 80V Products: To remove the battery, push and hold the battery release button. Then, pull the battery pack straight out. In some cases, if the springs underneath have gotten locked down you might have to give a small push to the top of the battery to re-engage them to help the battery pop up. The battery pack fits snugly into the product to prevent accidental dislodging while in use; it may require a strong pull to remove. Before use, be sure that the rails on the battery and product are free of debris that could cause the battery to get stuck. 24V/ 40V Products: To remove the battery, press the latch button on the battery pack down and hold. Pull the battery pack out of the handle. The battery pack fits snugly into the product to prevent accidental dislodging while in use; it may require a strong pull to remove. Before use, be sure that the rails on the battery and product are free of debris that could cause the battery to get stuck.
Press the battery capacity indicator (BCI) button located at the end of the battery. The lights will illuminate according to the battery capacity level. Please note this switch does require a firm direct push using the tip of your finger. If the button is not being fully engaged, the lights will not activate. Please also be advised the lights only stay on for a few seconds and will automatically turn off. Another reason the lights will not power on is if the battery is completely depleted of power and needs to be charged.
Our batteries are interchangeable with tools that are of the same voltage platform only. The difference between batteries of the same voltage is the ampere-hour (Ah) rating. The higher the ampere-hour (Ah) rating on the battery is the more run time it has to offer.
There are a few exceptions. • Our 80V 20” snow thrower models 2600402 / 2605202 / 2601302 manufactured prior to September of 2017 can only use 2.0Ah or 2.5Ah battery models. • Our 60V 8.0Ah battery model 2957102 cannot be used in the following tools due to the height: dual-port lawnmowers, pressure washers, or the wet/dry vacuum.
Yes, they do. Each product line has designated charger models that can charge all batteries in that voltage platform, no matter the Ah rating.
The temperature of the battery prior to use should not be too warm or too cold. For snow throwers if the battery is too cold it may not be operatable. Allow the battery to get to room temperature prior to use. For our other tools allow the battery to cool down prior to use if it’s too warm. To avoid battery temperature issues, batteries should be stored indoors in a dry and cool location. Information on battery storage and temperature will in inside your owner’s manual.
Putting a battery that was just in use onto the charger often results in a false full charge signal. Remove the battery from the charger and allow it to rest in a room temperature area for approximately 10-15 minutes before charging.
When the battery is inserted into the charger and the status LED blinks red, remove the battery from the charger for 1 minute, then reinsert. If the status LED blinks green, then the battery is properly charging. If the status LED is still blinking red, remove the battery and unplug the charger for 1 minute. After 1 minute, plug in the charger and reinsert the battery. If the status LED blinks green, then the battery is properly charging. If the status LED is still blinking red, then this likely indicates an issue with the battery or charger and should be taken care of either with our warranty team or by means of replacement.
This typically indicates that the battery is at the wrong temperature to be charged. Allow the battery and charger to rest indoors at room temperature until they are no longer hot/cold and attempt charging again.
Greenworks chargers sold in the USA and Canada are designed for use on 120V outlets only.