Coupe-bordure 24 V et souffleur à jet 100 MPH – 330 CFM, batterie 2,0 Ah et chargeur inclus.
Coupe-bordure 24 V et souffleur à jet 100 MPH – 330 CFM, batterie 2,0 Ah et chargeur inclus. est en rupture de stock et sera expédié dès qu’il sera de retour en stock.
Available At:
Garantie
Garantie
Compatible With :
Description
Description
La plate-forme lithium-ion Greenworks 24 V alimente plus de 100 produits d'intérieur et d'extérieur, notamment des tondeuses à gazon, des souffleurs, des coupe-bordures, des tronçonneuses, des outils électriques et bien plus encore ! La batterie lithium-ion 24 V fournit 20 % de puissance en plus et 35 % d'autonomie en plus, et offre une puissance sans décoloration et sans perte de mémoire après la charge. L'équipement électrique extérieur vous permet d'attaquer jusqu'à 1/4 acre avec les batteries disponibles de 1, 5 Ah, 2 Ah et 4 Ah. Les ports USB sont intégrés aux batteries BAG711, BAG708 et BAG709, ce qui en fait un chargeur portable pour téléphones, tablettes et autres accessoires électroniques compatibles. La plateforme Greenworks 24V est livrée avec un outil/batterie de 3 ans pour protéger votre investissement
Souffleur de feuilles sans fil 24 V :
- Souffleur de feuilles sans fil 24 V, conception axiale puissante, fournissant 330 CFM à des vitesses d'air allant jusqu'à 100 MPH
- Dispose d'une commande à 2 vitesses offrant une polyvalence pour les projets légers et lourds.
Coupe-bordure sans fil 24 V 12" :
- Coupe-bordure sans fil 24 V de 12 po doté d'un chemin de coupe de 12 po / d'un fil unique de 0,065 po / d'une tête d'alimentation automatique pour un avancement rapide et facile du fil
- Roue attachée pour bordure à conducteur marchant
- La gâchette à vitesse variable fournit une puissance sur demande pour couper les mauvaises herbes tenaces
- Conception polyvalente avec tête pivotante à 3 positions pour une coupe facile sous plusieurs angles
Fonctionnalités partagées :
- Le port USB de la batterie charge tous les appareils électroniques portables, y compris les téléphones et les tablettes. Station d'alimentation portable à batterie USB (banque d'alimentation 24 000 mAh)
- Garantie limitée de 3 ans sur les outils et la batterie
*La durée de fonctionnement varie en fonction de l'état de l'herbe et de la technique de l'opérateur*
Spécifications
Spécifications
-
Spécifications du souffleur à jet 24 V 100 MPH - 330 CFM (outil uniquement)
-
Tension24 V
-
Poids3,4 livres.
-
Dimensions du produit assemblé36,2" × 6,8" × 9,9"
-
Dimensions de l'emballage15,9" × 8,6" × 10,2"
-
Poids du colis3,9 livres. (1,8kg)
-
Pilesnon incluses/vendues séparément
-
MoteurBrossé
-
Puissance nominale du moteur0,24 kW
-
Conception du ventilateuraxial
-
Vitesse maximale de l'air (MPH)100 MPH
-
Volume d'air maximum (CFM)330CFM
-
Déclencheur à vitesse variable ?Oui
-
Bouton TurboNon
-
Régulateur de vitesseNon
-
Poignée rembourréeOui
-
Niveau de bruit à 50' (longue portée)69,7 dB
-
Temps d'assemblage estimé≈15 minutes
-
Garantie3 ans de garantie
-
Spécifications du coupe-bordure 24 V 12" (outil uniquement)
-
Tension24 V
-
Poids6,17 livres.
-
Dimensions du produit assemblé58,6" x 11,4" x 11,0"
-
Dimensions de l'emballage30,1" x 9,0" x 7,4"
-
Poids du colis10,1 lb. (4,6 kg)
-
Pilesnon incluses/vendues séparément
-
MoteurBrossé
-
Puissance nominale du moteur0,227 kW
-
Vitesse(s) à vide8 000/9 000 tr/min
-
Commutateur de vitesseN/A
-
Saut de ligne ?Auto
-
Saut de ligne simple ou double ?Double
-
Diamètre du fil de coupe0,065"
-
Bande de coupe (pouces)10"/12"
-
Arbre télescopique ?Oui
-
Longueur de la tige46,2" (117,3 cm)/ 57,2" (145,2 cm)
-
Compatible avec les pièces jointes ?Non
-
Tête de coupe-bordure rotative ?Oui
-
Temps d'assemblage estimé≈15 minutes
-
Garantie3 ans de garantie
Manuels
Manuels
Foire aux questions
Foire aux questions
- What is the difference between auto-feed and bump and feed string trimmers?
- What attachments are compatible with my string trimmer?
- Why does my trimmer line keep breaking during use?
- Can I remove the guard from my string trimmer?
- Why does my line keep unraveling?
- What does reduced gear mean for my string trimmer?
- Does my unit come with trimmer line?
- Can I use a thicker diameter line than what is recommended?
- Can I buy replacement line locally?
- Can I change the original trimmer head?
- Do you make Gas Blowers?
- Is a battery powered leaf blower quieter than gas?
- What is more important MPH or CFM?
- What is the most appropriate blower for my property?
- Can I use my blower to dry my car or blow snow off my driveway?
- What is the difference between a hand blower and backpack blower?
- How do I use the mulch function with my blower/vacuum?
- Why is dust coming out of my collection bag while using my Blower?
- Why is my vacuum not collecting garden debris?
- What blower can I use for Hard surfaces?
- What is the battery life and how do I maximize it?
- Can I leave my battery in the charger after charging it?
- Why do batteries cost so much more than the tool?
- How do I store the battery? Can I leave the battery in the garage or shed?
- My battery is stuck in my tool. How do I get it out?
- How do I check the charge on my battery?
- Can I use any Greenworks battery in any Greenworks tool?
- Are there certain tools that can’t accept all same voltage batteries?
- Do all batteries of the same voltage use the same charger?
- Does battery temperature matter?
- The charger indicates that my battery is fully charged but I was just using it and it depleted. Why isn’t it charging?
- My charger is flashing red when I engage my battery. Why is this happening?
- My charger has a solid red light on it when I engage my battery. What is happening?
- Are your chargers made for 220V or 120V outlets?
Auto-feed string trimmers use centrifugal force to release trimmer line. Each time the unit is activated, the spinning of the trimmer head exerts a force that unlocks the trimmer spool, allowing line to be released. A spring-loaded mechanism relocks the line after approximately 0.25” of line has been release. Therefore, every trigger pull will release line. Bump feed/ bump and feed string trimmers work with a similar mechanism, but the spool lock is manual disengaged by the user by “bumping” the trimmer head on the ground while the unit is in use. This mechanism provides operators with more control over how much line is used.
For attachment capable string trimmers, the following brands are compatible: Poulan Pro, Ryobi-Expand-it and Trimmer plus. If you are unsure if you have an attachment capable string trimmer unit, please contact us at 1-888-90-WORKS
Trimmer line will break off during use which is a normal occurrence. In harsher terrain or when used to edge, the string trimmer's line will break off more often as it makes contact with hard surfaces. To reduce line breakage here are some tips: • Keep the underside of the trimmer head/guard area clean of debris. • Ensure that the cutting blade is clean/clear, and the blade is exposed and shard enough to trim the line. This will also help to reduce excessive line breakage. • Avoid direct contact with hard surface areas when using the string trimmer. • In thicker, denser, and longer grass, you may want to go slower. Listen to the sound of the string trimmer, if it reduces speeds, or slows down too much, back away from the grass and start again at a slower pace.
No, string trimmers should never be operated without a guard. The guard is a safety feature and helps reduce debris such as grass clippings from being picked up and flung towards the user. It also has a cutting bar on it to prevent line from overextending and breaking off at large lengths. Operating without a guard will cause the string trimmer to work harder than it must and will reduce the life span of the motor. It will also void the warranty.
Line unraveling can be caused by winding the spool line the wrong way or simply not winding it tight enough. Please make sure you follow the guide inside your owner’s manual thoroughly as this process may take some time to correctly achieve.
A string trimmer that has a reduced gear motor does not directly drive the trimmer head. Instead, the motor drives a larger gear that is attached to the trimmer head. This reduces the speed of rotation but increases the torque. It allows a smaller, lighter motor to produce extra torque and perform tasks more efficiently, while ensuring that the unit is easy to maneuver.
Yes, all Greenworks string trimmers come with spool and line that has already been installed in your unit.
No, we do not advise using a thicker diameter line than what is advised in your owner’s manual. The use of a thicker line may result in over working the motor and could potentially damage the motor resulting in shorter life span of the unit. This will also void your warranty.
Yes, you can use any generic brand of trimmer line to rewind your existing spool. Please refer to your owner’s manual to ensure you purchase the correct diameter of line for your unit.
No, we do not offer this feature currently. However, we do offer attachment capable string trimmer units that can be used with a variety of different attachments from the following brands: Poulan Pro, Ryobi Expand-It and Trimmer Plus.
All Greenworks leaf blowers are cordless, battery-powered blowers or corded. Greenworks does not make gas-powered models.
Electric and battery-powered leaf blowers – in general, are quieter than gas models. DB rating does depend on the model. Depending on the yard you intend to work on, the airflow coming from the device can be a primary factor as well.
Both CFM and MPH have their benefits. It would depend on which type of blower you’re looking for. MPH is an abbreviation of miles per hour. This denotes the speed at which the air exits the blower. Higher MPH figures produce large pressure changes at the blower inlet. Therefore, a higher MPH is beneficial when looking at blower/vac units. MPH is usually the more important stat here as a higher airspeed helps move heavier debris. CFM is an abbreviation of cubic feet per minute. This denotes the volume of air displaced by the blower. High CFM units tend to move large air volumes at relatively low speeds allowing large areas to be swept and cleared in a controlled, shorter time. Therefore, axial blowers/dedicated blowers benefit more from a higher CFM and is more desirable for these units
Generally, electric leaf blowers have a CFM falling somewhere from just under 200 to 400. If your property is an acre or more, you will probably want a leaf blower with a CFM between 400 to 700
We do not recommend using this blower for any task other than leaf blowing.
Hand-held blowers are often less expensive than backpack blowers. They have smaller motors to ensure they're not too heavy to carry. Since the motor is smaller, they have less power. These blowers are great if you have a small yard, but can be taxing if you’re spending 30-40 minutes on the job. Backpack blowers provide more power, and you can carry them wherever you go. They have the added benefit of being more ergonomic since you are not relying solely on arm strength. Backpack blowers are better for tackling large jobs, but they’re also more expensive than the hand-held blower
When mulching leaves the Blower/Vac must be in TURBO-MULCH mode. Items such as small leaves and twigs will be mulched as they pass through the fan housing. We recommend emptying the bag after each use to avoid deterioration and obstructing air flow, which will reduce the performance of the mulcher.
There are tiny holes in the collection bag that are necessary for the operation of the Greenworks collection bag. These will allow very small particles of dust to pass through.
If your blower is not easily picking up the leaves, ensure that the nozzle is close enough to the leaves. Also make sure that the mode indicator is on the correct setting. Press the low/high switch to increase the speed options. The unique design of the blower-vac means that only light weight, low density objects such as leaves, and garden debris will be collected. It’s worth noting, higher density objects such as stones and sticks will not be collected. If you are finding the unit is still not picking up it may be necessary to remove the blower tube or mulcher tubes to clear a blocked tube or impeller. Please be sure to remove the battery or unplug the unit before checking the tube or impeller.
The best push power for removing heavy or wet organic materials from soft surfaces like grass, dirt or sand will come from a corded electric blower or from our 80V PRO blowers. The 80V 580 CFM Brushless Backpack Blower, with up to 580 CFM at 145 or the 80V 500 CFM Cordless Brushless Axial Blower with up to 500 CFM of air flow both units offer more CFM
To get the most life out of your battery, you should remove it from the charger once it has finished charging. The problem with overcharging is the potential damage to the battery which can shorten its lifespan and leave you in a lurch if it quits in the middle of a project.
The battery chargers do have auto cut offs to prevent it from over charging. However, we do advise customers to remove the battery from the charger after it has been fully charged and to also unplug the charger from the outlet, as this is good electrical safety practice to do so. This will also help to prevent false defect readings and allows the charger to reset itself each time it’s used to charge a battery.
The battery is the most important component for a battery-operated unit. Please be assured we price our batteries with the cost of material, manufacturing, and current market pricing in mind. Batteries are the costliest items to manufacture and ship in any kit. Full kits including a tool, battery, and charger are priced affordably so that consumers can begin building that line of tools and move forward purchasing tool-only units. When you purchase batteries on their own, it is more notable the cost that they carry.
When the battery is not in use, we suggest storing it indoors, in a cool dry area - away from direct sunlight. Leave the charger unplugged and the battery disconnected from the charger unless it needs charging. It is recommended to store the battery with a full charge, and if it is being stored for a period where no use is expected, to check on the charge every couple of months. If you notice the charge has dropped, we advise charging the battery back up to full before returning it to its safe storage place. Following these steps will ensure you receive the most out of the battery life.
60V/ 80V Products: To remove the battery, push and hold the battery release button. Then, pull the battery pack straight out. In some cases, if the springs underneath have gotten locked down you might have to give a small push to the top of the battery to re-engage them to help the battery pop up. The battery pack fits snugly into the product to prevent accidental dislodging while in use; it may require a strong pull to remove. Before use, be sure that the rails on the battery and product are free of debris that could cause the battery to get stuck. 24V/ 40V Products: To remove the battery, press the latch button on the battery pack down and hold. Pull the battery pack out of the handle. The battery pack fits snugly into the product to prevent accidental dislodging while in use; it may require a strong pull to remove. Before use, be sure that the rails on the battery and product are free of debris that could cause the battery to get stuck.
Press the battery capacity indicator (BCI) button located at the end of the battery. The lights will illuminate according to the battery capacity level. Please note this switch does require a firm direct push using the tip of your finger. If the button is not being fully engaged, the lights will not activate. Please also be advised the lights only stay on for a few seconds and will automatically turn off. Another reason the lights will not power on is if the battery is completely depleted of power and needs to be charged.
Our batteries are interchangeable with tools that are of the same voltage platform only. The difference between batteries of the same voltage is the ampere-hour (Ah) rating. The higher the ampere-hour (Ah) rating on the battery is the more run time it has to offer.
There are a few exceptions. • Our 80V 20” snow thrower models 2600402 / 2605202 / 2601302 manufactured prior to September of 2017 can only use 2.0Ah or 2.5Ah battery models. • Our 60V 8.0Ah battery model 2957102 cannot be used in the following tools due to the height: dual-port lawnmowers, pressure washers, or the wet/dry vacuum.
Yes, they do. Each product line has designated charger models that can charge all batteries in that voltage platform, no matter the Ah rating.
The temperature of the battery prior to use should not be too warm or too cold. For snow throwers if the battery is too cold it may not be operatable. Allow the battery to get to room temperature prior to use. For our other tools allow the battery to cool down prior to use if it’s too warm. To avoid battery temperature issues, batteries should be stored indoors in a dry and cool location. Information on battery storage and temperature will in inside your owner’s manual.
Putting a battery that was just in use onto the charger often results in a false full charge signal. Remove the battery from the charger and allow it to rest in a room temperature area for approximately 10-15 minutes before charging.
When the battery is inserted into the charger and the status LED blinks red, remove the battery from the charger for 1 minute, then reinsert. If the status LED blinks green, then the battery is properly charging. If the status LED is still blinking red, remove the battery and unplug the charger for 1 minute. After 1 minute, plug in the charger and reinsert the battery. If the status LED blinks green, then the battery is properly charging. If the status LED is still blinking red, then this likely indicates an issue with the battery or charger and should be taken care of either with our warranty team or by means of replacement.
This typically indicates that the battery is at the wrong temperature to be charged. Allow the battery and charger to rest indoors at room temperature until they are no longer hot/cold and attempt charging again.
Greenworks chargers sold in the USA and Canada are designed for use on 120V outlets only.