Scie à perche sans balais, 80 V, 10 pouces (Outil seulement)
Description
Description
Notre scie à perche sans balais sans fil Greenworks 80 V de 10 pouces est un moyen sûr et facile de couper les branches et les branches hautes sans utiliser d'échelle. Le moteur sans balais offre plus de couple pour une expérience de coupe professionnelle. La gamme Greenworks comprend plus de 50 outils de 80 V, permettant vous d'abandonner vos outils à gaz pour une alternative innovante et écologique.
- Barre et chaîne de 10 po. pour une coupe facile des branches et des branches
- Technologie de moteur intelligent sans balais. 2x plus de couple. Fournit plus de puissance, des durées de fonctionnement plus longues, un fonctionnement silencieux et une durée de vie prolongée du moteur
- Rallonge de 8' pour une portée maximale de 11 pieds
- Le graisseur automatique prolonge la durée de vie de votre chaîne 1/4 po.
- Réservoir d'huile translucide pour une vision claire du niveau d'huile
- Batterie et chargeur vendus séparément
- Garantie limitée de 4 ans sur les outils
Inclus : Une (1) scie à perche sans fil de 10 pouces, une (1) perche d'extension de 8'
*La durée de fonctionnement varie en fonction de l'état de l'herbe et de la technique de l'opérateur*
Spécifications
Spécifications
-
Voltage80 V
-
Poids9,5 livres
-
Dimensions du produit assemblé108,2 po. × 5,9 po. × 7,8 po.
-
Dimensions de l'emballage44,0 po. × 9,8 po. × 6,5 po.
-
Poids du colis19,7 livres. (8,9 kg)
-
BatteriesNon incluses / Vendues séparément
-
MoteurSans balais
-
Puissance nominale du moteur0,85 kW
-
Frein de chaîne actif ?Non
-
Longueur du guide-chaîne/chaîne10 po.
-
Taille de la chaînePas de 1/4 po à profil bas, Calibre .050 po, 58 maillons d'entraînement
-
Taille du fichier d'affûtage de chaîne5/32 po.
-
Système de tension ?Avec outil
-
Vitesse de la lame10 mètres par seconde
-
Graisseur de chaîneAutomatique
-
Type d'huileHuile standard pour guide-chaîne et chaîne
-
Capacité du réservoir d'huile80 ml
-
Temps d'assemblage estimé≈ 5 minutes
-
Garantie4 ans de garantie
Manuels
Manuels
Vidéos de produits
Foire aux questions
Foire aux questions
- What is a pole saw?
- How should I hold my pole saw?
- What safety precautions should be taken?
- How thick of a branch can I cut?
- Can the pole saw be used for hedges?
- Can you remove the poles and use this as a chainsaw?
- Can I use my pole saw to trim items lower to the ground?
Pole saws are basically stretched chainsaws with the controls and the motor head separated by a long pole. They tend to have shorter bars and chains than full size chainsaws and are primarily used for pruning and light lopping. Users should take basic, common safety precautions and follow proper operating procedure when using the units to avoid injury.
For best balance when using a pole saw do not overreach. Always keep proper footing and balance. Practicing proper footing and balance ensures that you will have proper control of the tool in unexpected situations. Always hold the unit firmly with both hands; keep your left hand on the pole shaft and your right hand on the rear handle, so your body is to the left of the chain line. Never use a left-handed (cross-handed) grip, or any stance that places your body or arm across the chain line. Ensure that you maintain a proper grip on the unit whenever the motor is running. For further details, refer to your owner’s manual.
Only use pole saws for their intended purpose. Pole saws are great for pruning and trimming of hard-to-reach branches. Think about where the branch being cut may fall. As this is sometimes unpredictable, do not stand under the branch being cut. Try to keep the tree between yourself and the branch being trimmed (as a kind of shield from falling debris). Keep bystanders at least 50’ from the tree being worked-on. Always take your time. When removing long, heavy branches cut in stages, cutting off small sections to reduce the impact of any falling debris. Start with lower branches so debris can fall more easily and not get stuck, causing a future hazard.
Pole saws are typically used on branches less than 6” in diameter.
The pole saw would be capable of trimming hedges; however, a pole hedger would be more appropriate for the job and leave a cleaner look.
No. This unit cannot be converted to a chainsaw. However, some models allow you the ability to remove the middle extension pole to shorten the unit by a few feet.
The pole saw is designed for high level hard to reach branches. It is not ergonomically suited for low cutting and extreme caution should be taken.
Customer Reviews
Easy to use effective! Glad I got it!
This pole saw has all the qualities you would want. Powerful and effective for cutting tree limbs yet quite enough to not being sound annoying. Safe and easy to use and eliminates the use of having to use a ladder for just cleaning up lower branches. I am pleased to add this unit to my other Greenworks 80 volt collection-snow blower lawn mower grass trimmer and blower as well as smaller voltage polishergrass hand trimmer and air compressor.
I just used. It and worked great
null
It works while maintaining the best performance. The only regret is that it is a bit heavy for me to operate and it is difficult to adjust the center of gravity when working.
