À cause d'une forte demande, l'expédition des commandes peut prendre plus de temps que prévu. Merci pour votre patience !

Enregistrez votre produit aujourd'hui !

Livraison gratuite sur toutes les commandes de plus de 50 $*

SKU : 2610402CT

Pelle à neige 60 V, 12 pouces, batterie 2,5 Ah et chargeur inclus

$499.99

Principales caractéristiques

  • Moteur sans balais : Moteur sans balais très efficace offre un couple accru, un fonctionnement silencieux et une durée de vie plus longue.
  • Quiet Operation - Allows you to work during early mornings or late evenings without disturbing your neighbours.
  • Clearing Width - Clears 12 inches in width.
  • Clearing Depth - Powers through snow up to 6 inches deep.
  • Auxiliary Handle - Adds comfort and control during use.
  • Push Button Start - For easier start up.
  • Lightweight - For comfort, control, and less fatigue – 20% lighter than comparable gas-powered models.

Garantie

warranty-image

Compatible With :

Description

La pelle à neige sans fil Greenworks 60 V présente un fonctionnement silencieux qui vous permet de travailler tôt le matin ou tard le soir sans déranger les voisins. Alimenté par une batterie lithium-ion de 60 V (vendue séparément) compatible avec l'ensemble du programme Greenworks de 60 V. Il a un design léger et compact pour un rangement facile et est idéal pour nettoyer les trottoirs, les allées et les patios.

Spécifications

  • Voltage
    60 V
  • Poids
    15,7 livres
  • Chemin de dégagement 
    12 po
  • Profondeur de dégagement 
    6 po
  • Distance de décharge
    20 pieds
  • Dimensions de l'emballage
    39,5 po. x 15,15 po. x 13 po.
  • Poids du colis
    23 lb (10,4 kg)
  • Moteur 
     Sans balais
  • Puissance nominale du moteur 
    1,2 kW
  • Zone de déneigement (neige de 4 po / neige de 10 po) 
    Jusqu'à 742,70 pi² / 258,33 pi²
  • Turbine à vitesse variable 
     Non
  • Matériau de la turbine 
    Polyéthylène
  • Longueur de la turbine
    11 po.
  • Vitesse à vide
    1 800 tr/min
  • Niveau de bruit à 0' (utilisateur)
    75 dB
  • Temps d'assemblage estimé 
    ≈ 10 minutes
  • Garantie 
     4 ans de garantie
  • Spécifications de la batterie UltraPower 60 V 2,5 Ah 
  • Voltage
    60 V
  • Ampères-heures 
    2,5 Ah
  • Poids
    0 lb.
  • Wattheures 
    135
  • Temps de charge à 100 % 
    À partir de 50 minutes
  • Indicateur DEL de diagnostic 
     Oui
  • Garantie 
     4 ans de garantie
  • Spécifications du chargeur plat 60 V - CAC801 
  • Voltage
    60 V
  • Poids
    1,98 livres
  • Taille 
    6,1 po. × 3,6 po. × 8,1 po.
  • Indicateur DEL de diagnostic 
    Oui
  • Temps de charge (batterie 2,0 AH)
    40 min
  • Temps de charge (batterie 2,5 AH)
    50 min
  • Temps de charge (batterie 4,0 AH)
    80 min
  • Temps de charge (batterie 5,0 AH)
    100 min
  • Garantie 
     4 ans de garantie

Manuels

Comprend

Foire aux questions

  • Is it difficult to use snow shovel/thrower with an extension cord?
  • It does take time to get used to having a cord attach to your snow shovel, we suggest keeping the electric cord as close to the outlet as you can and then move away from the outlet, so the slack always stays on the side you are moving away from or put the cord over your shoulder. That way it is always behind you while using the snow shovel but over time it will get easier to manage.

  • Can I use my Snow Shovel on uneven pavement?
  • We do not recommend using this snow shovel on uneven or non-paved areas. It works best on smooth and flat surface areas. As the operator works along the uneven surface, the tool will need to be lifted to avoid contact. Contact to non-paved areas will damage the scraper faster the more the unit makes hard contact.

  • Does the Snow Shovel have a chute?
  • The Snow Shovel is not equipped with a chute; it is a light duty unit, perfect for light to moderate snow conditions. We suggest directing the snow in front or to either side by pushing the snow shovel forward so that it rides on the scraper. The direction of the snow is changed when the user turns the shovel.

  • Why won’t my snow shovel start?
  • The tool is equipped with a safety start up feature. The units will only start when the following sequence is done: 1.Verify that the battery pack is inserted into the battery compartment. 2.Press and hold the lock-out button 3.While holding the lock-out button, press and hold the trigger switch. Please note, the Snow Shovel will not start if the lock-out button is not held until the trigger switch is lifted. Once trigger is pressed and unit is started, release the lock-out button.

  • Can I use my Snow Shovel on stairs?
  • Snow shovels are an effective tool for clearing steps and decks with ease. They are lightweight, gasless, and easy to start, so almost anyone can operate them.

  • Can I leave my battery in the charger after charging it?
  • The battery chargers do have auto cut offs to prevent it from over charging. However, we do advise customers to remove the battery from the charger after it has been fully charged and to also unplug the charger from the outlet, as this is good electrical safety practice to do so. This will also help to prevent false defect readings and allows the charger to reset itself each time it’s used to charge a battery.

  • Why do batteries cost so much more than the tool?
  • The battery is the most important component for a battery-operated unit. Please be assured we price our batteries with the cost of material, manufacturing, and current market pricing in mind. Batteries are the costliest items to manufacture and ship in any kit. Full kits including a tool, battery, and charger are priced affordably so that consumers can begin building that line of tools and move forward purchasing tool-only units. When you purchase batteries on their own, it is more notable the cost that they carry.

  • How do I store the battery? Can I leave the battery in the garage or shed?
  • When the battery is not in use, we suggest storing it indoors, in a cool dry area - away from direct sunlight. Leave the charger unplugged and the battery disconnected from the charger unless it needs charging. It is recommended to store the battery with a full charge, and if it is being stored for a period where no use is expected, to check on the charge every couple of months. If you notice the charge has dropped, we advise charging the battery back up to full before returning it to its safe storage place. Following these steps will ensure you receive the most out of the battery life.

  • My battery is stuck in my tool. How do I get it out?
  • 60V/ 80V Products: To remove the battery, push and hold the battery release button. Then, pull the battery pack straight out. In some cases, if the springs underneath have gotten locked down you might have to give a small push to the top of the battery to re-engage them to help the battery pop up. The battery pack fits snugly into the product to prevent accidental dislodging while in use; it may require a strong pull to remove. Before use, be sure that the rails on the battery and product are free of debris that could cause the battery to get stuck. 24V/ 40V Products: To remove the battery, press the latch button on the battery pack down and hold. Pull the battery pack out of the handle. The battery pack fits snugly into the product to prevent accidental dislodging while in use; it may require a strong pull to remove. Before use, be sure that the rails on the battery and product are free of debris that could cause the battery to get stuck.

  • How do I check the charge on my battery?
  • Press the battery capacity indicator (BCI) button located at the end of the battery. The lights will illuminate according to the battery capacity level. Please note this switch does require a firm direct push using the tip of your finger. If the button is not being fully engaged, the lights will not activate. Please also be advised the lights only stay on for a few seconds and will automatically turn off. Another reason the lights will not power on is if the battery is completely depleted of power and needs to be charged.

  • Can I use any Greenworks battery in any Greenworks tool?
  • Our batteries are interchangeable with tools that are of the same voltage platform only. The difference between batteries of the same voltage is the ampere-hour (Ah) rating. The higher the ampere-hour (Ah) rating on the battery is the more run time it has to offer.

  • Are there certain tools that can’t accept all same voltage batteries?
  • There are a few exceptions. • Our 80V 20” snow thrower models 2600402 / 2605202 / 2601302 manufactured prior to September of 2017 can only use 2.0Ah or 2.5Ah battery models. • Our 60V 8.0Ah battery model 2957102 cannot be used in the following tools due to the height: dual-port lawnmowers, pressure washers, or the wet/dry vacuum.

  • Do all batteries of the same voltage use the same charger?
  • Yes, they do. Each product line has designated charger models that can charge all batteries in that voltage platform, no matter the Ah rating.

  • Does battery temperature matter?
  • The temperature of the battery prior to use should not be too warm or too cold. For snow throwers if the battery is too cold it may not be operatable. Allow the battery to get to room temperature prior to use. For our other tools allow the battery to cool down prior to use if it’s too warm. To avoid battery temperature issues, batteries should be stored indoors in a dry and cool location. Information on battery storage and temperature will in inside your owner’s manual.

  • The charger indicates that my battery is fully charged but I was just using it and it depleted. Why isn’t it charging?
  • Putting a battery that was just in use onto the charger often results in a false full charge signal. Remove the battery from the charger and allow it to rest in a room temperature area for approximately 10-15 minutes before charging.

  • My charger is flashing red when I engage my battery. Why is this happening?
  • When the battery is inserted into the charger and the status LED blinks red, remove the battery from the charger for 1 minute, then reinsert. If the status LED blinks green, then the battery is properly charging. If the status LED is still blinking red, remove the battery and unplug the charger for 1 minute. After 1 minute, plug in the charger and reinsert the battery. If the status LED blinks green, then the battery is properly charging. If the status LED is still blinking red, then this likely indicates an issue with the battery or charger and should be taken care of either with our warranty team or by means of replacement.

  • My charger has a solid red light on it when I engage my battery. What is happening?
  • This typically indicates that the battery is at the wrong temperature to be charged. Allow the battery and charger to rest indoors at room temperature until they are no longer hot/cold and attempt charging again.

  • Are your chargers made for 220V or 120V outlets?
  • Greenworks chargers sold in the USA and Canada are designed for use on 120V outlets only.

Pelle à neige 60 V, 12 pouces, batterie 2,5 Ah et chargeur inclus

$499.99

La pelle à neige sans fil Greenworks 60 V présente un fonctionnement silencieux qui vous permet de travailler tôt le matin ou tard le soir sans déranger les voisins. Alimenté par une batterie lithium-ion de 60 V (vendue séparément) compatible avec l'ensemble du programme Greenworks de 60 V. Il a un design léger et compact pour un rangement facile et est idéal pour nettoyer les trottoirs, les allées et les patios.

Voir le produit